Sanding Sanding Discs

Rockler > Sanding Discs > Sanding

Sanding Discs from Rockler Select Subcategory Here Sanding Discs Sanding Accessories Sanding Belts Sanding Discs Sanding Drums

Rockler Sandpaper Disc Station Five plastic holders slide out for quick loading on top of wood cabinet. Alignment notch helps align sander’s dust collection holes with disc holes.Holds 5-hole or 8-hole disc sandpaper.Cabinet measures 8-1/8" high x 6-1/4" wide x 5-1/2" deep.Includes 25 alignment pins.Optional 5' Disk Holders (3/Set) Sold Separately
MicroMesh8482 Cushioned Abrasives With a flexible cloth back and resilient inner layer, micron-graded silicone carbide crystals recede to an even planing level as they establish each successively finer scratch pattern.5" disk assortment pack with hook-and-loop design and 3" x 4" soft-touch pads both include one each of 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 and 12000 grit abrasives.For best results, use conventional abrasives up to 400 grit sandpaper, then begin the Micro-Mesh series at 1500.Water may be used as a lubricant.Also works great on acrylics, plastics, urethanes, coatings, fiberglass and more. 27940 - 3' x 4' Soft-Touch Pads 20106 - 5' Disk Assortment Pack
Microplanereg 5 Sanding Discs Edges use a cutting action rather than scraping.Each disc is equivalent to 30-40 sheets of sandpaper!With hook-and-loop backing for easy attachment and removal.Fits 5-hole and 8-hole pattern sanders.Available in three grits (two discs per pack).5" disc assortment includes three discs (one of each grit).For raw wood only.
5 NonWoven Pads Non-woven pads are produced in a single process from base fibre that is carded, layered and reeded to form a fleece. A variety of flexible resins and selected grits produce abrasive material with a range of desirable properties.Can be used with lacquers and cleaners.As materials wear in use, more grit is exposed, resulting in longer life and more consistent finish.Can be used wet or dry or with finishing fluids.Won't leave rust stains.Micro Fine - Gold 1200 grit aluminum oxide. Get a high gloss finish on solid surfaces and fiberglass finishing.Ultra Fine - Gray 600 grit silicon carbide. Ideal for sanding sealer coat. De-fuzzes semi-gloss or solid surfaces.Very Fine - Maroon 320 grit aluminum oxide. For rust removal and automotive finishing. Creates matte finish on solid surfaces.