Shelf Pins from Rockler
Select Subcategory Here
 Shelf Pins
|
|
|
 Low Profile Shelf Supports
Installing is simple, just cut a 1/8' mortise in the shelf edges. Made of brown plastic. Inserts into 5mm hole. Comes in packs of 16.
|
 5mm Pin Supports
These 5mm pin supports and optional sleeves are sold in packs of 16. Finish available in brass, antique brass, nickel or black. Pin Supports have a spoon (paddle) design with a 5mm diameter shaft. Optional sleeves are available to be used with these pin supports. Sleeves require a 7/32' diameter hole, 5/16' deep. Tenons on pin supports are 8mm; overall pin length is 19mm. These supports with or without sleeves are perfect for use with JIG IT shelf drilling system - sold separately.
|
 14 Shelf Glass Supports
These 1/4' shelf supports are made of clear plastic. Use on glass. Packs of 16.
|
 14 Locking Shelf Supports
Use a 1/4' pin hole. Packs of 16.
|
 14 Cushioned Shelf Pins
These 1/4' cushioned shelf pins are gentle on shelves. These 1/4' cushioned shelf pins are brass plated steel with a plastic wrapped support that is gentle on shelves. View JIG IT Shelving Jig Video Demonstration --->
|
 14 Shelf Supports
|
 Brusso Solid Brass Pin Supports
Brusso Solid Brass Pin Supports are top-of-the-line pin supports for your finest woodworking projects. Pins fit a 1/4' diameter hole and can be used with or without additional sockets. Pins are 3/4' long overall with 3/8' going into hole a 3/8' positioned under shelf. Solid brass sockets are available to relieve wear and tear on wood. Sockets have a 1/4' inside diameter and a 3/8' outside diameter with a 7/16' length. Both pins and sockets are unlacquered.
|
Contact Us