Specialty Finishes

Rockler > Specialty Finishes >

Specialty Finishes from Rockler

Hut Wood Finish An easy to apply finish designed for wood pens and other turned wood items. This finish is designed specifically for applying to wood pens or other wood turnings as they are spinning on the lathe. Use the satin gloss block for an easy-to-apply finish to your pens or pencils. For a gloss finish, first use the satin gloss block followed by the high gloss block. Creates an instant durable finish. No drying time required. Non-toxic. 2 ounces.
Polyethylene Glycol PEG Green Wood Stabilizer Polyethylene Glycol is dissolved in water. Wood is treated by submersing into the PEG/ water mix. 10 lb. container (10 lbs. will make 15.4 quarts of a 30 percent solution or 8.48 quarts of a 50 percent solution).For more information on treating green wood, see the book Wood and How to Dry It. Learn methods of seasoning and drying lumber, measuring moisture, air-drying and building a dry kiln. This book is also a great reference for fundamental information about wood. 106 pages, soft cover.
Staybrite Lacquer and Flitz Brass Cleaner Staybrite Lacquer Use Staybrite Lacquer to preserve the sparkle and brilliance of new or recently cleaned brass, copper or bronze surfaces. 12 ounce aerosol can. Clear gloss. Recommended for interior and exterior use.Flitz Brass Cleaner Use Flitz Brass Cleaner to rejuvenate brass or other metal surfaces quickly and easily. Brings back the original luster without harsh abrasives. 50 grams ( 1.7 ounces).
Jet Spray8482 Lacquer Instructions for use:For best results, use only when can temperature is between 65 and 90F.Shake can vigorously for at least one minute after ball rattles to ensure uniformity of sheen and prevent clogging.Aim the nozzle, holding can 12" to 14" away from surface, and press button firmly.Use steady, even strokes while spraying. Several thin coats give a better finish than one heavy coat.Allow coating to become tacky between coats.Clean spray button immediately after use by turning can upside down and pressing spray button for 5 seconds or until no more product comes out.Let dry 24 hours before light use.Please note that this item can only be shipped to addresses within the continental United States by UPS Ground only.
Dry Erase Whiteboard Finish Compatible with any dry erase markers and erasers.Remove markings with an eraser or rag!Two-part formula, just mix them together and you’re ready to paint.Dries to the touch in 1 hour.Recoat after 20-30 minutes.Coverage: 50 sq. ft. — two coats create up to a 7' x 7' dry erase surface.Allow 2 days dry-time before writing on surface.Clean up with soap and water.
SprayOn Chalkboard Finish Black Apply two or more coats a few minutes apart.May be recoated within the hour, or after 24 hours.Dries to the touch in 20 minutes, and can be handled after 1 hour.Please note that this item can only be shipped to addresses within the continental United States by UPS Ground only.
Behlen Scratch Remover Markers Black Cherry Extra Dark Walnut Mahogany Red Medium BrownWalnut Van DykeBrown
Behlen Furniture Powder Apply with a cloth pad or a brush wetted with Qualasole™ or Wipe-On Water Base Urethane.Can also be padded on with French Lac or brushed on with 2 Minute Repair Liquid.
Jet Spray8482 Lacquer Toners Use only when can temperature is between 65° and 90°F.Several thin coats give a better finish than one heavy coat.Allow coating to become tacky between coats.Allow to dry 24 hours before use.Can only be shipped by UPS Ground to addresses within the continental United States.
Brushing Lacquer Quart.Use a natural hair brush for application.Ready to use.If easier flow is desired, thin with Brushing Lacquer Thinner.Best results achieved by “flowing on” (saturating the brush).Apply 2-3 coats.Allow 1-2 hours dry time between coats.Allow 24 to 72 hours prior to rubbing, if rubbing is desired.Can only be shipped by UPS Ground to addresses within the continental United States.
Jet Spray8482 Blush Eraser8482 For best results, use when air temperature is between 65-90° F.Apply several thin coats.Extremely flammable.Please note that this item can only be shipped by UPS Ground to addresses within the continental United States.
Violin Varnish Pint.May be sprayed brushed or padded.Use thin multiple coats.Dries dust free in 10-15 minutes.Allow 1-2 hours between coats.Allow 24 hours prior to rubbing out the finish.Use Behkol solvent (57950) for thinning and cleanup.Only shipped by UPS Ground to addresses within the continental United States.
Lacquer Blush Retarder Quart.Deduct any amount added from the thinner ratio.Only shipped by UPS Ground to addresses within the continental United States.
Behkol Solvent
Qualalacq8482 Thinner Quart.Ideal for use with Qualalacq Sanding Sealer, and Qualalacq Lacquers.Can only be shipped by UPS Ground to addresses within the continental United States.
Qualalacq8482 Alcohol Resistant Lacquers Recommended for use with Qualalacq Sanding Sealer and Qualalacq Thinner.Reducing proportion: 35-50 lbs. spray gun pressure – 1:1 (Thinner to Lacquer).To help prevent orange peeling or blushing, use Behlen Lacquer Retarder.Allow 1 hour dry time after first coat.Allow 1-2 hours dry time after second coat.Third coat optional.Allow 18-24 hours dry time before rubbing.Can only be shipped by UPS Ground to addresses within the continental United States.
Behlen Top Coat Lacquer and Sanding Sealer Top Coat Lacquer:Fully compatible with Behlen solvent base stains and other Behlen aerosol lacquers.Allow 1 hour dry time between coats.Allow final coat to dry overnight.Sanding Sealer:Sand wood to 320 grit before application.Allow 30 minutes to dry before sanding to 360 grit smoothness.Never apply more than 2 coats of sealer.Allow 1 to 2 hours dry time for the final coat.Can only be shipped by UPS Ground to addresses within the continental United States.
Cabot OilBased Varnish Cabot Varnish enriches fine wood surfaces with a beautiful clear finish that protects surfaces from minor nicks, scratches, spills, and stains. For interior fine wood surfaces including doors, furniture, and cabinets.For use on bare, stained or previously finished wood.Safe for children's furnitureDo not use on wood floors or other surfaces subjected to moderate or severe abrasion.Do not thin.Apply only when air temperature is between 50-90° F.One quart covers up to 125-165 sq ft, depending on porosity.Clean brushes and tools with mineral spirits.Dries hard in 4-6 hours, longer in humid or cold weather.Wait overnight before recoating or using.Re-formulated to comply with current low-VOC regulations.Please note that this item can only be shipped by UPS Ground to addresses within the continental United States.
Cabot PreStain Wood Conditioner Apply before the first coat of stain.Dries quickly; Do not let the pre-stain conditioner begin to dry, or the stain will not penetrate wood surface. Will not cause warping.Evens out contrast by reducing depth of stain penetration.One quart covers up to 100 sq ft depending upon surface porosity. Please note that this item can only be shipped by UPS Ground to addresses within the continental United States.
Rockhard8482 Table Top Varnish Reducer Reduce varnish seal coat up to 50%. Additional coats may be reduced up to 25% to allow for better brushing and flow characteristics.Can also be used to clean equipment or brushes.Keep out of reach of children. Harmful or fatal is swallowed. Combustible liquid and vapor.Quart.
Tamise Metal Leaf Flakes Tamise, Mix Red Flakes Tamise, Variegated Spring Flakes Easy to use: Simply prime porous surfaces with gilding primer in Red, Yellow or Gray; apply leaf adhesive and allow to come to tack; sprinkle tamise flakes on sized area (brush off and save extra flakes); seal and glaze (if desired).Suitable for any indoor artwork on plaster, stone, canvas, paper, metal or wood.See our Basic Gilding Kit
Basic Gilding Kit For interior gilding projects only.Additional imitation gold leaf, copper leaf and aluminum leaf sold separately; 25 (5-1/2" x 5-1/2") leaves per package.Additional water-base leaf adhesive sold separately.Pigmented gilding primer (sold separately) seals the surface, hides flaws and provides an excellent base for leaf adhesive. For use on wood, plaster, metal and composition surfaces. Use Yellow primer with genuine and imitation gold leaf; Red for copper leaf; and Gray for silver or aluminum leaf. See also Gilding Primer which is a pigmented primer that seals the surface, hides flaws and provides an excellent base for leaf adhesive. The prepared surface needs to be nonporous and smooth. A surface primer, such as shellac, is recommended. Imitation Gold Leaf and Copper Leaf must be sealed after gilding to prevent tarnishing. Lacquer, shellac or other high quality sealers recommended. Imitation Gold Leaf, Aluminum Leaf and Copper Leaf are recommended for interior gilding projects only.
Gilding Primer Pigmented primer seals the surface, hides flaws and provides an excellent base for leaf adhesive.For use on wood, plaster, metal and composition surfaces.Use Yellow with genuine and imitation gold leaf; Red for copper leaf; and Gray for silver or aluminum leaf.4 oz. each.