| [«] « prev | 1 | 2 3 | next » [»] |
41 Total Results
Showing Results from 1 to 15
|
| 
Shelf Standard, 60'' length
Technical Details Zinc plated cold rolled steel 9/16' wide x 3/16' thick Available in 24', 30', 36', 48', 60', and 72' lengths Can be cut to desired length Sold individually Mounting nails included Whats in the Box One zinc-plated shelf standard Best Used With Item #33837 Zinc Supports (available below) . . .
|
MORE DETAILS | 
Walnut Shelf Standard, 72'' length
These walnut-colored shelf standards can be either flush or surface mounted. Walnut-colored standards are made from aluminum. Nails are furnished. Dimensions are 5/8' wide x 3/16' thick. Shelves may be adjusted for 1/2' spacing.Matching-color supports are also available. Supports measure 9/16' wide by 3/4' long. Suppor . . .
|
MORE DETAILS | 
Shelf Standard, 30'' length, white
These white epoxy coated shelf standards can be either flush or surface mounted. White epoxy coated standards are made from cold rolled steel. Nails are furnished. Dimensions are 5/8" wide x 3/16" thick. Shelves may be adjusted for 1/2" spacing. Shown with matching-color supports (sold separately, Rockler# 22153). Supp . . .
|
MORE DETAILS |
12-1/2'' White Bracket
These Epoxy coated shelf brackets are made of steel and use a twin track system to securely mount to the 14-gauge 1' W x 5/8' deep steel standards on the Twin-track system. Chip resistant epoxy finish. Load Rating 8-1/2'bracket holds up to 187 lbs. 10-1/2' bracket holds up to 165 lbs. 12-1/2' bracket holds up to 132 lb . . .
|
MORE DETAILS |
Zinc Supports (16 per pack)
Technical Details Zinc plated cold rolled steel 9/16' wide x 3/16' thick Available in 24', 30', 36', 48', 60', and 72' lengths Can be cut to desired length Sold individually Mounting nails included Whats in the Box One zinc-plated shelf standard Best Used With Item #33837 Zinc Supports (available below) . . .
|
MORE DETAILS |
Shelf Standard, 36'' length
Technical Details Zinc plated cold rolled steel 9/16' wide x 3/16' thick Available in 24', 30', 36', 48', 60', and 72' lengths Can be cut to desired length Sold individually Mounting nails included Whats in the Box One zinc-plated shelf standard Best Used With Item #33837 Zinc Supports (available below) . . .
|
MORE DETAILS |
Shelf Standard, 24'' length
These sturdy, brass-finished shelf standards can be surface mounted or recessed into cabinet sides. Support slots are spaced at 1/2'' for maximum flexibility in adjusting shelf heights. Mounting nails are included. Matching color brass shelf supports are sold separately.Technical Details:Made of cold rolled steel with . . .
|
MORE DETAILS |
8-1/2'' White Brackets
These Epoxy coated shelf brackets are made of steel and use a twin track system to securely mount to the 14-gauge 1' W x 5/8' deep steel standards on the Twin-track system. Chip resistant epoxy finish. Load Rating 8-1/2'bracket holds up to 187 lbs. 10-1/2' bracket holds up to 165 lbs. 12-1/2' bracket holds up to 132 lb . . .
|
MORE DETAILS |
Shelf Standard, 24'' length
Technical Details Zinc plated cold rolled steel 9/16' wide x 3/16' thick Available in 24', 30', 36', 48', 60', and 72' lengths Can be cut to desired length Sold individually Mounting nails included Whats in the Box One zinc-plated shelf standard Best Used With Item #33837 Zinc Supports (available below) . . .
|
MORE DETAILS |
Walnut Shelf Standard, 36'' length
These walnut-colored shelf standards can be either flush or surface mounted. Walnut-colored standards are made from aluminum. Nails are furnished. Dimensions are 5/8' wide x 3/16' thick. Shelves may be adjusted for 1/2' spacing.Matching-color supports are also available. Supports measure 9/16' wide by 3/4' long. Suppor . . .
|
MORE DETAILS |
10-1/2'' White Bracket
These Epoxy coated shelf brackets are made of steel and use a twin track system to securely mount to the 14-gauge 1' W x 5/8' deep steel standards on the Twin-track system. Chip resistant epoxy finish. Load Rating 8-1/2'bracket holds up to 187 lbs. 10-1/2' bracket holds up to 165 lbs. 12-1/2' bracket holds up to 132 lb . . .
|
MORE DETAILS |
Installation Kit for Standards
These Epoxy coated shelf brackets are made of steel and use a twin track system to securely mount to the 14-gauge 1' W x 5/8' deep steel standards on the Twin-track system. Chip resistant epoxy finish. Load Rating 8-1/2'bracket holds up to 187 lbs. 10-1/2' bracket holds up to 165 lbs. 12-1/2' bracket holds up to 132 lb . . .
|
MORE DETAILS |
Low Profile Shelf Supports (Pack Of 4)
Supports made from steel with a statuary bronze finish. Use with Shelf Standards (sold separately, Rockler sku #22492) to make recessed shelving systems. . . .
|
MORE DETAILS |
Walnut Shelf Supports (16 per pack)
These walnut-colored shelf standards can be either flush or surface mounted. Walnut-colored standards are made from aluminum. Nails are furnished. Dimensions are 5/8' wide x 3/16' thick. Shelves may be adjusted for 1/2' spacing.Matching-color supports are also available. Supports measure 9/16' wide by 3/4' long. Suppor . . .
|
MORE DETAILS |
48'' White Twin-Track Standards
White Twin-Track StandardsEpoxy White Twin-Track Standards come in three sizes: 48" (SKU 68122), 63" (SKU # 68130) and 78" (SKU 68163). Use with Epoxy White Shelf Brackets. Standards are 14-gauge 1" W x 5/8" deep steel, chip resistant epoxy finish. Installation kit (SKU #68346 - sold separately) contains six #12 2-1/2" . . .
|
MORE DETAILS |
| [«] « prev | 1 | 2 3 | next » [»] |
41 Total Results
Showing Results from 1 to 15
| |
Find Hardware Categories Here