|
11 Total Results
Showing Results from 1 to 11
|
| 
Desk Top Fasteners, Pack of 8
Figure-8 shaped fasteners are countersunk for screw heads on each side for easy fastening to your desk or table top and apron. 12'' spacing between fasteners around the desk or table perimeter is recommended. Technical Details:Two countersunk holes with 5/8'' centers.Includes #6 x 3/4'' flathead screws.1-3/16'' x 11/16 . . .
|
MORE DETAILS | 
Table Top Fasteners (8 pack)
These Table Top Fasteners provide a sturdy connection between the tabletop and apron, while still allowing the top to expand and contract with seasonal humidity changes. This prevents cracks from forming over time. The table clips slip neatly into a groove in the apron and attach to the tabletop with a single screw-sim . . .
|
MORE DETAILS | 
Plastic Table Pins
Hold table leaves or halves in perfect alignment. Plastic pins (pictured at top) measure 3/8" in diameter, 1-1/4" long. Sold 8 per pack. #28548 Also available in Brass (# 32334)or Wood (# 21253). . . .
|
MORE DETAILS |
1-1/2'' x 3'' Kerf Mount Corner Bracket, Set of 4
Corner braces will make your table stronger. This bracket is kerf mounted and made of 18 gauge steel and is 1-1/2" X 3".* Wing Nuts and Hanger Bolts are sold separately.* Sold in set of 4. Available in other sizes:* #34303 is kerf mounted and made of 14 gauge steel and is 3" X 4-3/4" and includes two holes for hanger b . . .
|
MORE DETAILS | 
Solid Brass Table Keeper
Perfect for heavier table tops! This three-piece set has a horseshoe connector and two catch units with internal steel friction springs. 3-1/2' Wide x 1-7/8' D. Mount on 2-1/4' centers. Holes are 3/4' apart. . . .
|
MORE DETAILS |
2'' x 4-1/2'' Kerf Mount Corner Bracket, Set of 4
Corner braces will make your table stronger. This bracket is kerf mounted and made of 18 gauge steel and is 2" X 4-1/2".* Wing Nuts and Hanger Bolts are sold separately.* Sold in set of 4. Available in other sizes:* #34303 is kerf mounted and made of 14 gauge steel and is 3" X 4-3/4" and includes two holes for hanger b . . .
|
MORE DETAILS |
Wood Table Pins
Hold table leaves or halves in perfect alignment. Wood pins (pictured in middle) measure 3/8" in diameter, 1-1/4" long. Sold 8 per pack. #21253 Also available in Brass (# 32334)or Plastic (# 28548). . . .
|
MORE DETAILS | 
Clinch Nut Plate for Straight Legs
Exceptional durability. Mount table legs easily with clinch nut plates and hanger bolts. Extra heavy gauge steel creates a solid assembly. Plates use a 5/16" hanger bolt. Comes in set of 4.Technical Details:Extra heavy duty steel.2-5/8'' square with 13/16'' x 13/16'' corner cut-off.Requires 5/16'' hanger bolt (not incl . . .
|
MORE DETAILS |
Brass Table Pins
Hold table leaves or halves in perfect alignment. Brass pins (pictured at bottom) are two-piece, and measure 5/16" in diameter, 31/32" long. Sold 8 per pack. # 32334Also available in Plastic (# 28548)or Wood (# 21253). . . .
|
MORE DETAILS |
3'' X 4-3/4'' Kerf Mount Corner Bracket, Set of 4
Corner braces will make your table stronger. This bracket is kerf mounted and made of 14 gauge steel and is 3" X 4-3/4" and includes two holes for hanger bolts.* Wing Nuts and Hanger Bolts are sold separately.* Sold in set of 4.Available in other sizes:* #24281 is kerf mounted and made of 18 gauge steel and is 1-1/2" X . . .
|
MORE DETAILS | 
Surface Mount Corner Brackets for Table Aprons, 4 Pack
These brackets reinforce connections between table rails quickly and easily. No gluing and no clamping required. Made from solid steel. Installation requires hanger bolts and wing nuts, not included. Size is 2-5/8" x 3-3/8" Flat. Sold in packs of four. . . .
|
MORE DETAILS |
|
11 Total Results
Showing Results from 1 to 11
| |
Find Hardware Categories Here