Workbenches from Rockler
Select Subcategory Here
 Workbenches
|
|
|
 Jorgenson Hold Down Clamp
Soft pads protect work piece from scratches and dents. The hold-down capacity is 4-1/2’’, less the thickness of the benchtop. Sold in pairsFor use with 3/4’’ benchtop holes.
|
 Workbench Leg Set
|
 36 Clamp N Cut Edge Guide
Ideal for circular saws, jig saws and routers.Can also be used as an auxiliary fence on a table saw, band saw or drill press.Large rubber clamping pads hold material firmly without marring the work.Integral hanging loop for convenient storage.
|
 Kreg Clamp Table and Rockler Stand with FREE Kreg Bench Clamp
The perfect assembly station for pocket hole joinery! Every feature is taken into account for optimum ease and speedy assembly:Klamp Blocks can be flipped and rotated for four different stock widths: 1-1/2", 2", 2-1/2" and 3".Bench Klamps swivel 360 for intermediate widths.Klamp Blocks are notched so dust slides underneath, allowing perfect positioning every time.Aluminum Klamp Traks are lightweight with a durable anodized finish.Table edging holds up to the inevitable bumps and bruises.Melamine work surface sheds glue easily. Simply let dry and scrape it away with a putty knife.Includes table, one 21-3/4" Klamp Trak, one 33-3/4" Klamp Trak and five Klamp Blocks.Bench Klamps sold separately.
|
 6Ft Solid Birch Top Maple Base and Workbench Combo
|
 12 Quick Release End Vise
New 12" on-center guide rods for mounting on the end of a bench.Also can be used as a front vise.Handle plate is drilled out and countersunk for easy attachment of wooden jaws (not included) with #12 wood screws.19" screw and body length.13" overall travel before wooden jaws are added.1" dia. guide rods.Includes hardwood handle.Easy to install with included instructions.Vise plate mounts to bench with 1/4" lag bolts.Mounting hardware not included.
|
 7 Quick Release Workbench Vise
Designed for benches up to 2-1/4" thick.7" wide jaws with 9" opening capacity.Jaws are drilled out for easy attachment of wooden vise pads.Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.Manufactured from close-grained cast iron.With hardwood handle.Vise faces are 2-7/8" high.7/8" screw diameter.Easy to install on your workbench top.
|
 9 Quick Release Workbench Vise
Designed for benches up to 2-1/4" thick.9" wide jaws with 13" opening capacity.Jaws are drilled out for easy attachment of wooden vise pads.Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.Manufactured from close-grained cast iron.With hardwood handle.Vise faces are 2-7/8" high.7/8" screw diameter.Easy to install on your workbench top.
|
 Steel Router Table Leg Set
Add an inexpensive, heavy-duty work stand to your shop. Its perfect as a work station, router table cabinet, workbench, assembly table or tool stand! You can easily use your grinder, sander, router table, scroll saw, chop saw and more! All legs and stretchers pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Shop stand legs are heavy-duty 1/8 steel to support any shop application. With 4 x 1/2 heavy-duty adjustable leveler for various height settings. Includes four 32 legs and all mounting hardware (carriage bolts and nuts). All parts coated with durable black sand paint. Shop stand hinges come complete with nuts and bolts for attaching to metal frames. OPTIONAL ACCESSORIES : 58866 - Locking Shop Caster Set Caster wheels allow for easy mobility around the shop. The caster wheel locks offer stand stability when needed.
|
 Sjoberg 34 Bench Dogs 4Pack
Reversible to permit clamping of thin work pieces. Unbreakable steel core with plastic covering protects edge tools and reduces accidental damage. Features unbreakable steel core with plastic covering to protect edge tools and reduce accidental damage. Reversible to permit clamping of thin work pieces. Fits any 3/4" dia. hole, Sjoberg Nordic Plus and Elite Duo 1500 models. With bullet catches for secure positioning and easy release. Made in Sweden.
|
 50 AllInOne Twin Clamp
50' All-In-One Twin Clamp (beneath board) shown with All-In-One Clamp Guide (#26718, above board). Bottom jaws solidly anchor the clamping guide to your bench while top jaws secure your work. Profile thickness matches 3/4" plywood. Doubles as a bench clamp for easy work holding, such as securing stock for sanding. Low profile design never obstructs your work. Fully adjustable; fits any drill press or band saw. Fast positioning with edge-to-edge grip. Can be used for corner clamping and other assembly work without bowing.
|
 AllInOne Clamp Guides
The perfect woodworking combination clamp and edge guide!Integral clamping jaws and locking lever provide a quick, easy way of clamping the guide.Features instant edge-to-edge clamping, low profile with no obstruction, extra long handle and 1-3/4" wide extrusion.Built-in T-track on top of the guide allows you to use any of our versatile accessories or shop-made jigs.Optional router base plate and circular saw plate lock onto T-track and provide perfect tracking along straight edge; HDPE construction.Aluminum squaring attachment has extra wide jaws and provides accurate square-up for guide system. Measures 7/8' high x 3-3/4' wide.Create your own shooting board for routing or cutting with the circular saw.Please Note: To engage the jaw the first few times, the "I"-shaped blue finger-grip MUST be pushed snug against the sliding jaw for the jaw to lock. Squeeze together until it clicks. Then push the finger-grip AWAY from the jaw to unlock sliding jaw.
|
 Sjoberg Nordic Plus Workbenches
With double row of 3/4" round bench dog holes from every vise location. Nordic Plus 1450 is 52-3/4" long. Nordic Plus 1660 is 61" long. Nordic Plus 1950 is 72-1/2" long. Each measures 19-5/8" wide x 33-7/8" high. Comes with two vises and four unbreakable steel-cored round bench dogs. Optional cupboard base (sold separately) with drawers and cabinets attaches to trestle base; cupboard back not included. Nordic holdfast 2-pack hold-down clamps also sold separately. Made in Sweden. OPTIONAL ACCESSORIES : 28439 - Nordic Holdfast Hold Down Clamps Strong clamps fit perfectly with the Nordic Plus workbenches. Comes in a 2-Pack. 10130 - Optional Cupboard Base Add storage to your workbench with this cupboard base. External overall size is 39' Wide x 17-1/4' Deep x 18' High. All three benches can be fitted with the cupboard and drawers. The cupboard back is not included. Each drawer measures: 12-1/4' W x 12-1/4' D x 3' H. Cupboard storage section measures: 24' Wide x 15' Deep x 15-3/4' High. Some assembly required.
|
 414 Reach HoldDown Clamp
Use this clamp for wedging the workpiece against your bench. 4-1/4' reach. 8-1/4' long. 11/16' diameter.
|
 Flush Mount Bench Stop
Lift up for stopping action and push down to the bench when not needed. Requires mortising.
|
 Round Bench Dogs
Securely hold stock to the bench. Spring allows height adjustment. For use on a 3/4' hole.
|
 Bench Accessory Kit
|
 Sjoberg Duo Workbench
Benchtop and trestle made from 100% European beech and oiled for protection.Features include four vise position options: standard position for right-handers; reverse position for left-handers; both vises on front for heavy-duty clamping; and vises at both ends for clamping in two positions.Double row of round bench dog holes from every vise location.Four unbreakable steel-cored round benchdogs.Two holdfasts can be located in any of the benchdog holes or in the holes on the front legs of the trestle.Benchtop and trestle measure 53" long x 21" wide x 34" high.Made in Sweden.
|
 7 Woodworkers Bench Vise
Solid steel guide rods reduce wear and tear, and give vises a smooth and true parallel action.Square body seating provides easy fit under benchtop so jaws are flush with bench. With 1/2" diameter handle. Toe-in feature provides even clamping pressure on the whole depth of the workpiece. Steel main screw with Acme threads for smooth and responsive adjustment. Accurately machined housings for smooth sliding movement.
|
 6 ClampOn Bench Vise
Main screw, guide rods and handle are chrome-plated for corrosion resistance.Lightweight cast-iron body. Toe-in feature provides even clamping pressure on the whole depth of the workpiece.Steel main screw with Acme threads for smooth and responsive adjustment. Accurately machined housings for smooth sliding movement and true parallel action.
|
 Rockler Bench Dogs
Ideal for all workbenches that have 3/4' dia. Holes. With low profile (7/16') for working with 1/2' thick material and up. Sold in packages of 4.
|
 Square Bench Dogs
|
 Adjustable MultiFunction Shop Stand
Add an inexpensive, heavy-duty work stand to your shop. Its perfect as a work station, router table cabinet, workbench, assembly table or tool stand! You can easily use your grinder, sander, router table, scroll saw, chop saw and more! All legs and stretchers pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Shop stand legs are heavy-duty 1/8 steel to support any shop application. With 4 x 1/2 heavy-duty adjustable leveler for various height settings. Includes four 32 legs and all mounting hardware (carriage bolts and nuts). Stand stretchers available in five sizes: 12 18, 24, 36 and 48. Each size includes four stretchers. Top stretchers can be mounted flush with top or 4 down to add drawer or woodworking vice. Maximum stand size is 48 x 48. All parts coated with durable black sand paint. Shop stand hinges come complete with nuts and bolts for attaching to metal frames. Build up to 15 different work stations! OPTIONAL ACCESSORIES: 58866 - Locking Shop Caster Set Caster wheels allow for easy mobility around the shop. The caster wheel locks offer stand stability when needed. 68834 -Router Table Leg Set Designed to fit our Rockler Router Tables. Includes 4 each of 24 Stand Strechers, 18 Stand Strechers, and 32 Shop Stand Legs. Four Leveling feet and hardware included.
|
Contact Us