Clamps Bar Clamps

Rockler > Bar Clamps > Clamps

Bar Clamps from Rockler Select Subcategory Here Bar Clamps Band Clamps Bar Clamps Clamp-It Handscrew Clamps Miter Clamps Pipe Clamps Specialty Clamps Spring Clamps

Quickgrip Micro Twin Clamp Set
Bessey Tradesman Bar Clamps A comfortable wood-handled grip is built right into this general purpose clamp. Features large acme threads. Perfect for light duty and hold downs. Available in a variety of sizes for light - to heavy-duty use plus hold downs.Light Duty Clamps (both 2' and 4' throat) have protective cap on lower jaw only. Medium and heavy duty clamps have caps on both jaws as pictured.The image above shows a Bessey Clamp with our new Clamp-It™ Assembly Square. Click here for more information on the Clamp-It™.Use the smaller clamps for as a sturdy fix for light projects.
Bessey KBody Clamps and Kit Bessey K-Body Clamp Kit - 20670 Kit contains two 24' K-Body clamps, two 40' K-Body clamps, and one set of four K-P Blocks as shown at right. Bessey K-Body Clamps Bessey K-Body Clamp Jaws are always 90 to the rail - assemblies always glue up square. The large, parallel jaws are uniquely designed to distribute even pressure across theentire surface of your work to stop bowing, turning, and lifting. Jaws are always 90 to the rail- assemblies always glue up square. Bessey K-P Blocks - 87924 When assembled with four K-body clamps you can form an accurate easy-to-assemble fixture for all types of rectangular framing. Block sold four to a set.
Parallel Clamp Blocks
Irwin 24 and 48 Parallel Clamps
Bessey K Bodyreg Clamp Extender 7-7/8" long.2-1/16" wide at base.1-1/8" wide at top.Durable aluminum construction provides a precise, rigid link.No loss of strength or parallelism.Extender lies flush with the top of clamp bar for flat glue ups.Matching channel in the Extender mates perfectly with the K Body clamp bar profile to eliminate twist and unwanted movement.Extender feet provide additional stability while laying upright on a bench or when turned over to straddle a carcase.Anodized finish prevents black marks from reaction with glue.Combine different sizes for custom lengths.
Irwinreg QuickGripreg 6 Bar ClampSpreader 2Pack The multi-position jaw can be positioned anywhere on the bar, making even the most challenging clamping or spreading task a snap.Non-marring, stay-on pads protect workpiece finish.Heat-treated steel bar minimizes bowing and twisting.250 lbs. of holding power per clamp.
Clamp Handle Grips You can easily install clamp handle grips in minutes with a few simple shop supplies you already have handy (sandpaper and glue). ID - approx 1-1/16"Length - approx 3-3/4"
EZClutch8482 Quick Release System for Bar Clamps The EZ-Clutch delivers quick, effortless release of tail stock and eliminates sticky clutch plates on your standard 3700 style bar clamps. Dramatically increases your leverage so bar clamp releases with ease. Retrofits in seconds! Rubberized handle for comfort. Hardened steel body for durability. Patent pending Position EZ-Clutch on bar clamp and squeeze clutch plates to a vertical position. Hook EZ-Clutch around the front of lower clutch plates. Lift the EZ-Clutch handle over the corner of the clamp head youre ready to go! Retrofits in seconds!Rubberized handle for comfort.Hardened steel body for durability.Installs in seconds without tools. 1) Position EZ-Clutch on bar clamp and squeeze clutch plates to a vertical position. 2) Hook EZ-Clutch around the front of lower clutch plates. 3) Lift the EZ-Clutch handle over the corner of the clamp head — you’re ready to go!Patent pending.--->
Irwin QuickGripreg XP Bar Clamp Clamp your project with up to 550 lbs. of clamping pressure. Features Quick-Change® that quickly converts clamp into a spreader.One-handed quick-release trigger.Delivers 550 lbs. of clamping pressure.3" throat depth.Available in three jaw capacities: 6", 12" and 24".
Irwinreg QuickGripreg 6 Mini Bar Clamp Constructed of reinforced resin for strength and durability.Heat-treated bar minimizes bowing and twisting.With non-marring pads to firmly grip and protect work.150 lbs. of clamping pressure.
Jetreg Parallel Clamps Jaw depth is 4-1/8".Features non-marring composite resin jaw faces that provide even clamping pressure. Jaws also reverse as a spreader.Ergonomic handle has soft grip for added comfort and increased torque.With Slide-Glide trigger for fast, easy adjustments and rule measurement system for a consistent setup.Moveable end stop helps preset clamping capacity.Parallel clamp kit includes two 24" parallel clamps, two 40" parallel clamps and one 4-pack of framing blocks.
Mini ClampIt8482 Assembly Square The same great features as our original Clamp-It but half the size! Great for making Doll Houses and Music Boxes. You might also be interested in the large Clamp-IT! Align it, clamp it and fasten it to get perfect 90 angles every time. Ideal for building jewelry boxes, humidors, drawers, music boxes and other small projects. Manufactured from high impact, rigid polycarbonate. Measures 4" x 4" x 1-1/4" square.
SureFoot Aluminum Bar Clamps With built-in clamp hook for convenient wall hanging — you'll no longer have to "clamp" the clamp." Sure-Foot Clamp Pads (Pack of 4) Won't rap your knuckles with this clamp's higher base for greater clearance and stability. Sure-Foot Clamp Pads (sold separately) slip over clamp jaws to protect against damaging wood and projects. 36' 48' Sure-Foot Aluminum Bar Clamps Ours on Left vs.Theirs on Right All of the Sure-Foot features in a lightweight bar clamp! Rockler’s exclusive design features extra-wide 2-1/2" foot for exceptional stability and higher base that raises bar 1-1/2" above the table for excellent handle clearance. Won’t rap your knuckles with this clamp’s higher base for greater clearance. With built-in clamp hook that locks on to a 1x board, eliminating need to clamp the clamp when hanging on a wall. Holes drilled on clamp faces for shop-made attachments. NEW Extension Connector Kit #29608 Turn these clamps into 8 ft, 12 ft, 16 ft, 20 ft ... or longer clamps by adding this extension kit! The 48" aluminum bar and connector allows you to extend your clamps to unlimited lengths in 4 ft. increments. Connector slips inside aluminum bars and is held in place by clevis pins to ensure secure positioning. Each kit includes one 4 ft. aluminum extension, one connector bar and four clevis pins.
4Way Equal Pressure Clamp
Bessey KliKlamp Generates over 250 lbs. of ratchet-action clamping pressure with just 18 lbs. of force- compared to just 45 lbs. of pressure with 45 lbs. of force from a standard spring clamp. You'll find thousands of uses on virtually any shape. Choose from sizes: 8" and 12".
HeavyDuty FStyle Clamps Made of heavy-duty 1' x 1/4' steel for minimal flex. Clamp heads have 2-1/2' throat to cover most clamping operations. Available in four lengths.
12 QuickGrip174 Bar ClampSpreader Quick and versatile, the quick change jaw changes from a clamp to a spreader as quick and easy as 1-2-3! The quick change multi-position jaw can be positioned anywhere on the bar, making even the most challenging clamping or spreading task a snap.
ClampIt174 Assembly Square and Clamps Sold Separately Our exclusive Clamp-It square guarantees a 90 degree joint every time, replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps! Simply put, the Clamp-It is a square you can clamp. It allows you to assemble any two pieces at 90 degrees, and even lets you assemble a cabinet one corner at a time. It works with any joinery technique, from nails to hand cut dovetails. With the 5 Mini Clamp-It Clamp Simple Joinery Picture Frame Joinery Adding a shelf Drill Press Jig RTA Assembly Pocket Hole Joinery Drawer Assembly Deck Rails Ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Clamp-It is also perfect for framing decks and installing rails and balusters. Attach it to a work surface, and it becomes a right angle fixture for bench assembly. Clamp-It is computer designed and manufactured from high impact, rigid polycarbonate to ensure strength and accuracy. Patented. Size of the Clamp-It is 8' X 8' X 1 - 1/2'. Drawer assembly: Clamp-It is designed for use on either the inside or outside of a corner, making it ideal for assembling drawers with lipped fronts. Deck Rails: Use Clamp-It to hold deck balusters at a perfect 90º angle while fastening. Bench Jigs: Clamp-It can be secured to any work surface to create a simple 90 assembly jig. Our exclusive 5' Mini Clamp-It: Clamp features a fixed head with a comfortable ergonomic handle and a moveable tailpiece. It was designed for use with the Clamp-It Assembly Square to create precision 90 degree angles with ease. Throat depth is 3/4' to clamp center on the assembly square, and the length of the bar is 5' to clamp any wood thickness up to 2 - 1/2'.