Framing Tools from Rockler
Select Subcategory Here
 Framing Tools
|
|
|
 Nobex Adjustable Miter Squares
The 6' or 14' Nobex Quattro 400 adjustable squares are handy miter squares which locks at 90, 45 and 135 degrees. It has a measuring scale on the blade for precise measuring, and collapses to fit in your tool box. Made from high quality durable steel. More accurate than most squares! Guaranteed plus or minus .04 degrees. The precision and convenience of these squares will add value to your work. Locks in a 135 degree angle. The photo on left is of the 9' square, we carry the 6' and the 14' squares.
|
 Clampmate Frame Clamp
Adjustable clamp is self-squaring as it pulls all four corners together. Reversible jaws work for either small or large frames. Clamps anywhere in a range from 5' x 7' to 26' x 30' . Quickly and easily folds for compact storage. Price for each.
|
 Brad Pusher
|
 Economic Brad Setter
Magnetic tip holds brad in place. Perfect for setting brads in frames and molding up to 3-5/8' Wide and 1-3/4' deep.
|
 Framers Pliers
Top quality pliers inserts points quickly and uniformly for a neat and attractive appearance. Just squeeze handle of this pliers to quickly drive points or brads. Inserts points and brads into wood frames to 3' wide and 1.5' deep. Rubber cushion protects frame finish. Framer's PointsApproximately 200 per pack. Hold art, canvas, matboard and glass in wood frames.
|
 PushMastertrade Picture Frame Joiner Kit
Includes PushMaster tool, 400 V-nails and instructions, plus a starter assortment of backing nails, flexipoints and screw eyes. PushMaster tool inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods. Additional V-nails, backing nails and flexipoints sold separately.V-nails, or frame nails, join the frame corners together to make a tight, firm join. Select a V-nail suitable to the molding height. As a general rule, use a V-nail about 50-60% of the molding height.Flexipoint bendable tabs are used to hold the picture into the frame.
|
 Spring Miter Clamp Set
Kit contains spreader tool and four each of the following clamps: 2-9/16", 3-3/8", 4-3/16" and 4-15/16".Also includes four suction feet for attachment to clip ends to prevent marring.
|
 EzyFramer VNail Installation Tool
V-nail installation tool lets you easily join mitered corners.Easily inserts V-nails and backing nails.Includes Ezy-Framer and 100 1/4" V-nails to make up to 25 frames.Additional V-nails in 1/4", 3/8" and 1/2" also available in packs of 400; sold separately.
|
 QuickRelease Corner Framing Clamp
Uses standard 1/4"-20 threaded rod (included).
|
 MultiMaster8482 Point Driver and Points
Multi-Master PointsFeatures Deep penetration into all woods. Twin 'barb' design with 50 percent more rigidity increases holding power. 'A - Frame' shape of point increases overall strength. Unique 'bend angle' provides flush to the frame fit for quick and easy removal of even the tightest fitting glass, artwork, matboard, and other materials. Use approximately 20 percent less points per frame. Approximately 3000 per box.
|
 Glass Cutter with Brass Handle Fluid Reservoir
Fluid dispensing glass cutter lays down a perfect bead of cutting fluid as you score. This Gold Tip Designer II features: An innovative Fiberlock, anti-leak, fluid dispensing valve system that lays down a perfect bead of cutting fluid as you score. Each comes with a 140 degree tungsten carbide cutting wheel. Solid brass handle includes a tapping ball at the end for easy break-out of glass. The wide head, wheel slot and ball bearing axle are hardened steel to prevent wear and accurately guide the cutting wheel. 6 - 3/8' Overall length
|
 Glass Pliers
Break out or nip glass, plastic or tile up to 1/4' thick!This pliers measures 8' overall length and is black.To break out glass: Insert the glass, plastic or tile 1/2' into the plier jaws. Align the center anvil under the score made in the top surface. Squeeze until the material breaks out.For nipping: Place material flat with score line parallel to the edge of the work surface, 1/16' in from the edge of the work surface. Squeeze pulling towards you, out and down for a clean break.
|
Contact Us