Planes, Scrapers and Rasps from Rockler
Select Subcategory Here
 Planes, Scrapers and Rasps
|
|
|
 Japanese SawRasp
Shinto saw rasps are manufactured from high quality saw blades to eliminate clogging.test
|
 8 Piece Riffler Rasp Set
Includes:Knife Rasp — Pointed tip, 5/16" wide.Flat Rasp — Pointed tip, 3/8" wide.Flat Rasp — Square tip, 3/8" wide.Half-Round Rasp — Pointed tip, 3/8" wide."Almond" Profile Rasp — Pointed tip, 5/16" wide.Square Rasp — Pointed tip, 3/16" wide.Round Rasp — Pointed tip, 3/16" wide.Triangular Rasp — Pointed tip, 1/4" faces.Files measure 7-1/2" long. All measurements are approximate.
|
 Rosewood Plane Handle Set
Use them to replace broken parts or plastic handles. The smooth rosewood is comfortable in your hand and imparts a sense of the magic of traditional woodworking. Fitting screw is included.
|
 Metabo Paint Remover
The environmentally friendly alternative to caustic paint strippers.Highly suitable for handling rabbets.Adjustable chip removal: 0-.012".Blade Cutting Diameter: 3-1/8".Max rabbeting height: 1-1/10".Carbide blades can be rotated three times to quadruple the service life. Easy one-screw installation with adjustment necessary.Low vibration reduces fatigue.Metabo S-automatic safety clutch prevents kick back and protects the blade and motor in the event that you hit a nail.Minimal dust.Encased aluminum die-cast gear housing.High-performance palloid gear system.Universal AC-DC motor with ample reserve power.Metabo winding protection grid protects the motor against abrasion, resulting in a service life up to five times longer.Torque: 18 inch pounds.Rated input: 710 watts.Amps: 6.4.No-load speed (RPM): 11,000.Tool weight: 6.25 lbs.Length: 10-3/4".
|
 Jumbo Plastic Razor Blades
|
 Hydereg 6in1 Painters Tool
Measures 7-3/8" in length.Blade is 3-3/8"L x 2-1/2"W.Scrapes paint.Spreads compound.Cleans rollers.Removes putty.Opens cracks or cans.Hammer Head end sets nails.Carbon steel blade.
|
 Stainless Steel Pry BarScraper Set
|
 1 Bahco Carbide Scraper
Extra strong handle made of high-impact plastic, specially designed for comfortable and efficient use.Triangular cemented blade has three convex edges precision ground to allow access to small, confined areas.Blade stays sharp and productive up to 50 times longer than a conventional steel blade.Replacement blade sold separately.
|
 Kunz Spokeshaves
Comes with 2-1/16" wide blade made from high carbon steel. Honing required before use.10" long cast-iron tool body has 45º bed angle and 25º grind angle.With two adjustable screws for setting depth of cut.Replacement blade is universal and can be used with both the flat and round spokeshave. Sold separately.
|
 RocklerGroz Hand Planes
Planes are engineered to exact tolerances while maintaining traditional standards of workmanship, design and performance.Blades are 95% carbon steel with a hardness of 58-62HRC. (Hardness Rockwell C)Guaranteed sole flatness to within 0.003".Simple and precise adjustment of plane iron alignment, depth of cut and throat opening.Handles on #4 smoothing plane and #5 jack plane are hand-rubbed hardwood.
|
 Nicholson Cabinetmaker Files
#12492 - 8' four-in-hand Rasp and File is four tools in one. Each side has both a rasp for solid stock removal and a double cut file for smoothing. One side is flat for working flat or convex surfaces, while the other side is half round for working concave surfaces.#12542 - 8' Round Wood Rasp Bastard Cut Used for the same purpose as regular wood rasps. Used in places for which their shapes make them particularly effective. Round shape. Bastard cut.#12349 - 10' Cabinet File Files are half-round in section. Teeth are slightly finer than those of wood files. Radius is larger and thinner than regular half-round files.#12369 - 10' Mill Smooth Cut Used for sharpening mill or circular saws. Also for draw-filing and finishing metals. Rectangular shape. Single cut on sides and edges. Two square edges. #12450 - 10' Pattern Maker Cabinet Rasp, 2nd Cut, #49 Half-round shape. Narrow pattern, cut edges. Used when smooth wood finish is required.#12476 - 10' Pattern Maker Cabinet Rasp, Smooth Cut, #50 Half-round shape. Narrow pattern, cut edges. Used when smooth wood finish is required. #12575 - File Handle with Inserts Interchangeable cushion inserts designed to fit most popular files. Handle made of strong high-impact material. Contoured to fit hand for straight, lathe and draw filing.
|
 Handled Carbide Scraper
|
 Microplanereg with Interchangeable Blades
Offset handle has comfortable grip and gives you great control.Comes with 2 flat blades.Replacement blades available in round and right angle.
|
 Three Blade Shavehook
Use the triangular shavehook for stripping paint and varnish from flat wooden surfaces and edges. Use the heart and combination shavehooks for concave, convex and shaped surfaces such as moldings. Blade should be perpendicular to the surface and drawn toward you.
|
 3Piece Cabinet Scraper Set
Use our new 3-piece cabinet scraper set to create a smooth finish on figured wood such as burls, crotches and bird's-eye maple. Set includes high-quality 6" x 2-1/2" Swedish steel scraper for holding an edge longer, 10" mill file and 10" round burnisher. Won't tear out or clog pores, so you'll get a cleaner finish. Creates shavings, not dust!10" round burnisher also available separately.
|
Contact Us