|
Pocket Hole Jigs from Rockler
|
|
|
 Mini Kreg Jig and Kit
A pocket hole jig that fits right in your pocket. The 'mini' is small enough to be highly portable and to fit into tight spaces. It’s also perfect for large workpiecesthe untapered body allows you to clamp the jig into place with ease. To use, simply start the plug into the hole, then place the groove of the Mini Kreg Jig onto the back of the plug and push it into place. The Mini Kreg Jig is constructed of a fiberglass reinforced nylon body, complete with a chip extraction hole, and a hardened steel drill guide. See pocket hole plugs.
|
 Pocket Hole Plugs
|
 Pocket Hole Quick Change Adapter Set
Set includes 1/4" Professional Quick Change Chuck, 3/8" Shaft Adapter and a 6" #2 Square Drive Extension for driving pocket screws.Insty-Bit 1/4" Professional Quick Change ChuckWill accept any 1/4" (6 mm) hex shank accessory.True one-handed operation, simply push the bit into the chuck.Safety Hold Mechanism prevents tools from falling out when chuck is in release position.Quick change hex shank optimizes drill torqueFits all keyed and keyless chucksWorks in all corded and cordless drills.Insty-Bit 3/8" Shaft Adapter1/4" shank clicks into Quick Change Chuck with a snap!Sleeve holds drill bit with hardened, no-slip allen screws.Works with all cordless screwdrivers and standard power drills.2500 RPM Maximum.6" #2 Square Drive ExtensionSquare Drive Bit won’t strip out.Power Groove keeps the bit firmly in the chuck.Works with all cordless screwdrivers and standard power drills.
|
 Kreg Premium Face Clamp
To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece (opposite the pocket holes), clamp with moderate pressure and drive a screw.Features a large, easy-to-grip handle for maximum leverage in clamping.Oversized 3-1/4" throat depth reaches across most frame widths.Handles up to 2-3/4" thick stock.
|
 Kreg Jigreg K3 Standard Pack
Perfect for contractors and carpenters on the job site, this tool has many of the same great features as the Master System.Solid metal drill guide insert assures a clean, accurate pocket hole.Hardened steel drill guides support the drill bit.Premium face clamp is the perfect clamp for drilling, assembly and more.Jig body made of rugged, glass-filled nylon composites.Includes K3 drill guide block, portable base, premium face clamp, 3/8" step drill bit, 6"-#2 driver bit, depth collar, 1/8" Allen wrench, screws, carrying case and instruction manual.
|
 Kreg Large Face Clamp Right Angle Clamp
Large face clamp reaches up to 6" and ensures a perfectly flush joint every time! Large pad keeps clamp from marring wood. Perfect for flat stock such as face frames, mitered picture frames and other similar joints.
|
|
Contact Us