Jointers from Rockler
Select Subcategory Here
 Jointers
|
|
|
 Delta8482 6 Variable Speed Bench Jointer
Extra large table provides ample work support for surfacing stock up to a full 6' wide. Center-mounted fence gives needed support throughout the cut for accurate edge jointing. Fence tilts 0 to 45 outward for bevel jointing & chamfering; features positive stops at 45 90. Wide range of speeds allows you to select the right speed for the size and hardness of the material you’re cutting. Variable 6,000 to 11,000 rpm speed range. Poly-V belt drive for maximum transmission of power to cutter head with minimum belt slippage. Balanced aluminum ball bearing cutter head for smooth operation; maintenance-free life. Two-knife cutter head with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives. Built-in cutter head lock to facilitate knife replacement and adjustment. Convenient in-feed table raising/lowering control with dual English/Metric scale to facilitate depth of cut adjustment; lock knob securely holds desired setting. Built-in chip chute directs dust and chips away from operator, motor and electricals. Rubber base pads, to minimize operating vibration; dampen noise level.Model 37-070 6' Variable Speed Bench Jointer. Includes basic machine with 10 amp., 120V, 60 Hz., motor; 2-knife cutter head, cutter head guard and lock, center-mounted fence, push blocks, wrenches and instruction manual.Motor- 10 amp., 120V, 60 Hz., AC Cutting Capacity: Max. Width- 6-1/8' (156 mm) Max. Depth- 1/8' (3 mm) Cutter head: Number of knives- 2 Speed- Variable, 6,000 to 11,000 rpm 12,000 to 22,000 cuts per minute Table size- 6-3/16' x 30' (157 x 762 mm) Fence: Size- 4-1/4' x 19-3/4' (108 x 502 mm) Tilt- 45 out Positive stops- 90 and 45 Overall Dimensions: Height- 13-1/2' (343 mm) Width- 18' (457 mm) Length- 30' (762 mm) Weight- 35 Lbs. (16 kg) ----> Variable 6,000 to 11,000 rpm speed range allows you to select the right speed for the size and hardness of the material you're cutting. Center-mounted fence gives needed support throughout the cut for accurate edge jointing. Fence tilts 0 to 45 outward for bevel jointing & chamfering; features positive stops at 45 & 90. Poly-V belt drive for maximum transmission of power to cutterhead with minimum belt slippage. Balanced cutterhead for smooth operation and maintenance-free life. Two-knife cutterhead with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives. Built-in cutterhead lock facilitates knife replacement and adjustment. Convenient, infeed table raising/lowering control with dual English/Metric scale facilitates depth of cut adjustment; lock knob securely holds desired setting. Built-in chip chute directs dust and chips away from operator, motor and electricals. Rubber base pads minimize operating vibratoin and dampen noise level. Extra-large table provides ample work support for surfacing stock up to a full 6" wide. Specifications Motor 10 amp WEIGHT 35 lbs.(16 kg) Cutting Capacity (max. width) 6 1/8" Cuts Per Minute 12,000-22,000 MOTOR 10 amp CUTTING CAPACITY Max. Width: 6 1/8"(156 mm) Max. Depth: 1/8"(3 mm) CUTTERHEAD Number of knives: 2 Variable Speed 6,000 to 11,000 rpm 12,000 to 22,000 cuts per min TABLE Size: 6 3/16" X 30"(157 X 762 mm) FENCE Size: 4 1/4" X 19 3/4"(108 X 502 mm) Tilt: 45 out Positive stops: 90 and 45 OVERALL DIMENSIONS Height: 13 1/2"(343 mm) Length: 30"(762 mm) Width: 18"(457 mm)
|
 DELTA JT360 Deluxe 6 Jointer
Motor: 3/4 HP, 120/240V, (wired 120V), 1 Phase, 60 hzCut Capacity - Width: 6-1/8" (156 mm)Cut Capacity - Depth: 1/8" (3 mm)Rabbeting Capacity: 1/2" (13 mm)Cutterhead Speed: 4,800 RPM, 14,400 CPMNumber of Knives: 3Cutterhead Diameter: 2-1/2" (64 mm)Table Size: 46" (1168 mm)Table Length of front table (Infeed): 22" (559 mm)Table Length of Rear Table (Outfeed): 22-1/2" (572 mm)Table Height: 33-3/8" (848 mm)Fence Size: 4-7/8" x 35" (124 x 889 mm)Fence Tilt: 45° in and outFence Positive Stops: 90°, 45° in and outDust Port Diameter: 4Width: 28" (711 mm)Height: 39" (991 mm)Length: 46" (1168 mm)Weight: 210 lbs (95 kg)Warranty: 2 Year Warranty
|
 DELTA 37361 DJ 30 12 Jointer
Motor: 1 phase, 3 HP 3450 RPM, 230V, 60 hzCut Capacity - Width: 12" (304 mm)Cut Capacity - Depth: 3/4" (19 mm)Rabbeting Capacity: 3/4" (19 mm)Cutterhead Speed: 5,000 RPM; 15,000 CPMNumber of Knives: 3Cutterhead Diameter: 3-7/8" (98 mm)Table Size: 84" x 13" (2134 mm x 330 mm)Table Length of front table (Infeed): 41-1/2" (1054 mm)Table Length of Rear Table (Outfeed): 41-1/2" (1054 mm)Table Height: 32" (813 mm)Fence Size: 5-1/2" x 47" (140 x 1194 mm)Fence Tilt: 45° in and outFence Positive Stops: 90°, 45° in and outDust Port Diameter: 5" Outside Diameter (127 mm)Width: 40" (1016 mm)Height: 43" (1092 mm)Length: 84" (2134 mm)Weight: 706 lbs (320 kgWarranty: 2 Year Warranty
|
 DELTA 37380 8 Professional Jointer
Motor: 1-1/2 HP, 120/240V (wired 120V) 1 Phase, 60 hzCut Capacity - Width: 8" (203 mm)Cut Capacity - Depth: 1/2" (13 mm)Rabbeting Capacity: 1/2" (13 mm)Cutterhead Speed: 5,600 RPM; 16,800 CPMNumber of Knives: 3Cutterhead Diameter: 2-1/2" (64 mm)Table Size: 72-3/4" (1848 mm)Table Length of front table (Infeed): 35-1/4" (895 mm)Table Length of Rear Table (Outfeed): 35-5/8" (905 mm)Table Height: 32-1/2" (826 mm)Fence Size: 4-7/8" x 35" (124 x 889 mm)Fence Tilt: 45° in and outFence Positive Stops: 90° and 45° in and outDust Port Diameter: 4Width: 34" (864 mm)Height: 48" (1219 mm)Length: 72-3/4" (1848 mm)Weight: 414 lbs (188 kg)Warranty: 2 Year Warranty
|
 DELTA 37275X 6 Professional Jointer
Motor: 1 HP, 120/240V, 60 hz, 1 Phase, 3450 RPMCut Capacity - Width: 6-1/8" (156 mm)Cut Capacity - Depth: 1/8" (3 mm)Rabbeting Capacity: 1/2" (13 mm)Cutterhead Speed: 4,800 RPM; 14,400 CPMNumber of Knives: 3Cutterhead Diameter: 2-1/2" (64 mm)Table Size: 46" (1168 mm)Table Length of front table (Infeed): 22" (559 mm)Table Length of Rear Table (Outfeed): 22-1/2" (572 mm)Table Height: 32-1/2" (826 mm)Fence Size: 4-7/8" x 35" (124 x 889 mm)Fence Tilt: 45° in and out, right and leftFence Positive Stops: 90°, 45° right and leftDust Port Diameter: 4Width: 46" (1168 mm)Height: 48-1/2" (1232 mm)Length: 28-1/2" (724 mmWeight: 225 lbs (102 kg)Warranty: 5 Year Warranty
|
 DELTA 37365X 8 Precision Jointer DJ20
Motor: 1-1/2 HP, 120/240V (wired 240V), 60 hz, 1 Phase TEFC, 3450 RPMCut Capacity - Width: 8" (203 mm)Cut Capacity - Depth: 5/8" (16 mm)Rabbeting Capacity: 5/8" (16 mm)Cutterhead Speed: 5,500 RPM; 16,500 CPMNumber of Knives: 3Cutterhead Diameter: 3-3/8" (86 mm)Table Size: 76-1/2" (1943 mm)Table Length of front table (Infeed): 42" (1067 mm)Table Length of Rear Table (Outfeed): 32" (813 mm)Table Height: 32" (813 mm)Fence Size: 5" x 35" (127 x 889 mm)Fence Tilt: 45° in and outFence Positive Stops: 90°, 45° in and outDust Port Diameter: 4Width: 26" (660 mm)Height: 32" (813 mm)Length: 76-1/2" (1943 mm)Weight: 394 lbs (179 kg)Warranty: 5 Year Warranty
|
 DELTA 37360 DJ 30 12 Jointer
Motor: 3 Phase, 3 HP, 3450 RPM, 220-240/460V (Wired 220V), 60 hzCut Capacity - Width: 12" (304 mm)Cut Capacity - Depth: 3/4" (19 mm)Rabbeting Capacity: 3/4" (19 mm)Cutterhead Speed: 5,000 RPM, 15,000 CPMNumber of Knives: 3Cutterhead Diameter: 3-7/8" (98 mm)Table Size: 84" x 13" (2134 mm x 330 mm)Table Length of front table (Infeed): 41-1/2" (1054 mm)Table Length of Rear Table (Outfeed): 41-1/2" (1054 mm)Table Height: 32" (813 mm)Fence Size: 5-1/2" x 47" (140 x 1194mm)Fence Tilt: 45° in and outFence Positive Stops: 90°, 45° in and outDust Port Diameter: 5" Outside Diaeter (127 mm)Width: 40" (1016 mm)Height: 43" (1092 mm)Length: 84" (2134 mm)Weight: 706 lbs (320 kg)Warranty: 2 Year Warranty
|
 DELTA 37350A DJ20 8 Precision Jointer
Motor: 1-1/2 HP, 120/240V (wired 240V), 60 hz, 1 Phase TEFC, 3450 RPMCut Capacity - Width: 8" (203 mm)Cut Capacity - Depth: 5/8" (16 mm)Rabbeting Capacity: 5/8" (16 mm)Cutterhead Speed: 5,500 RPM; 16,500 CPMNumber of Knives: 3Cutterhead Diameter: 3-3/8" (86 mm)Table Size: 76-1/2" (1943 mm)Table Length of front table (Infeed): 42" (1067 mm)Table Length of Rear Table (Outfeed): 32" (813 mm)Table Height: 32" (813 mm)Fence Size: 5" x 35" (127 x 889 mm)Fence Tilt: 45° in and outFence Positive Stops: 90°, 45° in and outDust Port Diameter: 4Width: 26" (660 mm)Height: 32" (813 mm)Length: 76-1/2" (1943 mm)Weight: 394 lbs (179 kg)Warranty: 2 Year Warranty
|
 54A JOINTER WQS KNIVES
Virtually all forms of joinery and the tools that cut them depend on straight edges and square cuts. The POWERMATIC 54A 6” Jointer makes it easy to achieve the high levels of accuracy you need in this always-crucial operation. Find out more about the 54A in this informative POWERMATIC Article, or view the Interactive Demo for an up-close look at this state-of-the-art jointer. Stock No. 1791279DXK Model 54A Cutting Capacity (W x D/in.) 6 x 1/2 Cutterhead Speed (RPM) 5,000 Number of Knives 3 Rabbeting Capacity (in.) 1/2 Table Surface (L x W/in.) 66 x 7-1/4 Fence (L x H/in.) 38 x 4 Blade Size (L x W x T/in.) 6-1/16 x 5/8 x 1/8 Fence Tilts (deg.) 45 L, 45 R Positive Stops (deg.) 45 L, 90 , 45 R Motor (TEFC) 1HP, 1Ph, 115/230V, Prewired 115V Net Weight: (lbs.) 332
|
 MODEL 60B JOINTER 3HP 230460V 3P
Model Number60BStock Number (3HP, 3Ph, 230/460V)1610078KCutting Capacity (W x D/in.)8 x 1/2Cutterhead Speed (RPM)7,000Number of Knives3Rabbeting Capacity (in.)1/2Table Surface (W x L/in.)8-1/2 x 73Infeed Table Length (in.)35-1/4Outfeed Table Length (in.)35-1/2Outfeed Table Height From Floor (in.)32Fence (H x L/in.)4-1/2 x 38Blade Size (L x W x T/in.)8 x 5/8 x 1/8Fence Tilt (Degrees)45 left, 45 rightPositive Stops (Degrees)45 right, 90, 45 leftDust Port Diameter (in.)4Dust Collection Minimum CFM Required 800Shipping Weight (lbs.)394Includes the following: cutter guard, dust collection adaptor, adjustable fence, three HSS knives two push blocksandgt;
|
 MODEL 60B JOINTER 2HP 230V 1P
Model Number60BStock Number (2HP, 1Ph, 230V)1610077KCutting Capacity (W x D/in.)8 x 1/2Cutterhead Speed (RPM)7,000Number of Knives3Rabbeting Capacity (in.)1/2Table Surface (W x L/in.)8-1/2 x 73Infeed Table Length (in.)35-1/4Outfeed Table Length (in.)35-1/2Outfeed Table Height From Floor (in.)32Fence (H x L/in.)4-1/2 x 38Blade Size (L x W x T/in.)8 x 5/8 x 1/8Fence Tilt (Degrees)45 left, 45 rightPositive Stops (Degrees)45 right, 90, 45 leftDust Port Diameter (in.)4Dust Collection Minimum CFM Required 800Shipping Weight (lbs.)394Includes the following: cutter guard, dust collection adaptor, adjustable fence, three HSS knives two push blocksandgt;
|
 POWERMATIC Powermatic 8 Parallelogram Jointer 2HP1Ph
Stock Number (2 HP, 1 Ph, 230V): 1610079Stock Number (3 HP, 3 Ph, 230V): 1610080Model:PJ882Cutting Capacity (WxD/in):8 x 1/2Cutterhead Speed (RPM):7,000Number of Knives:3Rabbeting Capacity (in):1/2Table Surface (WxL/in):10 x 14Fence (HxL/in):4-3/4 x 38-3/16Blade Size (LxWxT/in): 8x 11 x 1/8Fence Tilts:45 degreesPositive Stops:90 degrees, 45 degreesMotor (TEFC):3 HP,2 Ph, 230V/460V or2 HP,1 Ph, 230V Shipping Weight (lbs):850/616
|
 JET JJ8CS 8 Closed Stand Jointer 2HP 1Ph 230V Only
Stock Number:708458KModel:JJ-8CSCutting Capacity (WxD/in):8 x 1/2 Cutterhead Speed (RPM):5,500Number of Knives: 3Rabbeting Capacity (in):1/2Table Surface (WxL/in):9 x 66-1/2Fence (HxL/in): 4 x 38-1/2Blade Size (LxWxT/in):8 x 11/16 x 1/8Fence Tilts Right Left:45 degreesPositive Stops: 45 degrees and 90 degreesMotor (TEFC):2 HP, 1 Ph 230V OnlyNet Weight (lbs):398
|
 JET JJ6OS 6 Open Stand Jointer 34HP 1Ph Two Way Tilting Fnce
Stock Number:708455Model:JJ-6OSCutting Capacity (WxD/in):6 x 1/2 Cutterhead Speed (RPM):4,850Number of Knives:3Rabbeting Capacity:1/2Rabbet Ledge (in):3-1/8 x 8-3/4Table Surface (WxLxH/in):7-3/8 x 46 x 31-3/4Fence (HxL/in):4 x 27-3/4Blade Size (LxWxT/in):6-1/16 x 5/8 x 1/8 Fence Tilts: 45 degrees R, 45 degrees LPositive Stops:45 degrees R, 90 degrees , 45 degrees LMotor (TEFC):3/4 HP, 1 Ph 115/230V Prewired 115VNet Weight (lbs): 192
|
 JET JJ6CS 6 Closed Stand Jointer 1HP 1Ph Two Way Tilting Fnce
Stock Number:708457KModel: JJ-6CSX Cutting Capacity (WxD/in):6-1/16 x 1/2Cutterhead Speed (RPM):4,800Number of Knives:3Rabbeting Capacity (in):1/2Table Surface (WxL/in): 7-3/8 x 46 x 31-3/4Fence (HxL/in):4 x 29-1/8 Blade Size (LxWxT/in): 6-1/16 x 5/8 x 1/8Fence Tilts Right Left:45 degrees - 45 degreesPositive Stops:45 degrees R, 90 degrees , 45 degrees Motor (TEFC): 1 HP, 1 Ph 115/230V Prewired 115VNet Weight (lbs): 258
|
|
Contact Us