Power Tools & Accessories Saw Blades and Accessories

Rockler > Saw Blades and Accessories > Power Tools & Accessories

Saw Blades and Accessories from Rockler Select Subcategory Here Saw Blades and Accessories Biscuit joiners and Accessories Chop Saw and Radial Arm Saw Blades and Accessories Delta Power Tools Dovetailers Drill Presses and Accessories Festool Incra jigs and Accessories Jet, Performax and Powermatic Tools Jointers Lathes and Accessories Machine/Tool Tables Nailers and Staplers Panel Saws Planers Pocket Hole Systems Routers Sanders Saw Blades and Accessories Scroll Saw Table Saw Miter Gauges, Tenoning Jigs and Fences Table Saw Set-Up and Calibration Tools Table Saws

Olsonreg All Pro Band Saw Blades These low-tensioned, milled blades are the premium choice of commercial users and professionals. Unlike flex back bands, All Pro features a hard back that can travel up to 6,000 SFM. The exclusive material (steel enriched with tungsten, chrome, and silicon, plus pinpoint carbides) offers strength and durability. Not sure about which tooth pattern to get? Skip, Hook or Regular ToothMade in the U.S.A. by Olson Saw Company.
Bench Dog FeatherLoc Pair
Bench Dog PushLoc Made in USA.Offset handle keeps your hand out of harm's way and improves visibility.Ergonomic "no-slip" grip.Rubber sole helps prevent slippage and won't mar your workpiece.Exclusive docking station keeps Push-Loc upright, always ready for use.
Bench Dog BladeLoc Protect your hands from serious injury.No more chipped or bent blades.Will not harm your saw blade.Fits all 10" blades.Replaces the scrap wood and double wrench methods of blade changing.
Deluxe Kerf Blades for SmallBox Hinges The Kerf Hinge Blade for Hardwoods and the Kerf Hinge Blade for Softwoods cut kerfs for the following hinges: 24692, 20617, 23001, 29229 and 21467.The Small Kerf Hinge Blade (24820) cuts kerfs for our small 7/8" hinge (28611) and for our Brass Frame Retainers (28578).Kerf Blade for Hardwoods is 0.046" thick.Kerf Blade for Softwoods is 0.032" thick.
Saw BladeRouter Bit Cleaning Kit
Olsonreg All Pro8482 Narrowwidth Band Saw Blades 9312 Fits 14" saws.Regular tooth pattern cuts a wide range of woods, plastic and non-ferrous metal.Raker set clears the dust quickly, allowing rapid cutting.Back Hardness of Rc 40-50, ideal for band saw speeds up to 4500 surface feet per minute.Tooth Hardness: Rc 64-6620322 Band Saw Blade 93-1/2", 3/32" Wide3/32" width can cut a 3/16" radius circle!Narrowest possible width allows the tightest possible turns.18 TPI offers the cleanest finish and the ability to cut extremely thin stock.Minimum material thickness of 5/32".28414 Band Saw Blade 93-1/2", 1/8" Wide1/8" width can cut a 1/4" radius circle!Slightly wider than the 3/32" blade for more stability.10 TPI offers a faster cut.Minimum material thickness of 5/16".
Olsonreg All Pro8482 Band Saw Blade Assortment 9312 Includes 5/8", 1/4" and 3/16" blades.Fits 14" sawsAll Pro blades have higher tensile strength than any other brand.Blades contain pin-point carbides, molybdenum, nickel, chrome and silicon to ensure maximum durability and easy cutting.Cuts a wide range of woods, plastic and non-ferrous metal.Raker set clears the dust quickly, allowing rapid cutting.Back Hardness of Rc 40-50.Tooth Hardness: Rc 64-66.3/16" Wide Band Saw Blade 93-1/2"3/16" width can cut a 3/8" radius circle!10 TPI offers the cleanest finish and the ability to cut thin stock.Minimum material thickness of 5/16".Maximum material thickness of 3".Regular tooth - excellent chip carrying capacity in narrow bands.1/4" Wide Band Saw Blade 93-1/2"1/4" width can cut a 3/4" radius circle.Medium width offers stability for a wide range of cutting applications.6 TPI balances fast cutting with less saw marks.Minimum material thickness of 1/2".Maximum material thickness of 5".Regular tooth - excellent chip carrying capacity in narrow bands.5/8" Wide Band Saw Blade, 93-1/2"5/8" width can cut a 4" radius circle.Wide blade offers maximum stability and beam strength for extremely straight cuts and resawing without “barreling”.Thin kerf makes the work easier for your saw and produces less waste.3 TPI can rip through the thickest lumber!Minimum material thickness of 1".Maximum material thickness of 6".Hook tooth - excellent chip evacuation in thick wood with a more aggressive feed.
Olsonreg MachSpeed8482 Scroll Saw Blades 5" blades.Precision milled teeth.Wide-spaced, ultra-sharp teeth clear the shavings quickly.Available in 3R, 5R, 7R and 9R sizes.Diagonally cut ends allow easy feed through starter holes and make installation a snap.12 blades per pack.22647 No. 3R, 13 TPI, 7 Rev.0.032" Wide0.014" ThickFor accurate, tight radius cuts in hard/soft wood 3/16" or thicker.27115 No. 5R, 13 TPI, 7 Rev.0.038" Wide0.016" ThickFor steady, close radius cuts in hard/soft wood 1/4" or thicker.22455 No. 7R, 8 TPI, 6 Rev.0.046" Wide0.017" ThickFor fast, close radius cuts in hard/soft wood 1/2" or thicker.26282 No. 9R, 8 TPI, 6 Rev.0.055" Wide0.018" ThickFor fast, close radius cuts in hard/soft wood 5/8" or thicker.
Phenolic Table Saw Insert Kit Phenolic plates measure 3-7/8" x 14" x 1/2" thick.
Freudreg 10 x 40T Hi ATB Premier Fusion General Purpose Blade The finest blade technology produces the ultimate cross-cutting and ripping blade! Fusion tooth design fuses 30 Hi ATB (high angle alternate top bevel) tooth with unique, double-side grind-tooth geometry for a glass-smooth side finish and flawless top and bottom finish. Larger micro-grain carbide tips offer more resharpenings and longer life.Thicker blade body for durability and straighter, truer cuts.Innovative anti-vibration technology absorbs vibration to stabilize the blade and eliminate sideways movement of the blade against the material.With laser-cut heat expansion slots that allow the blade to expand during heat build-up, keeping the cut straight and true.Pre-tensioned blade body ensures flatness.Tri-metal brazing.Non-stick Perma-SHIELD coating.Rips hardwoods up to 1-1/2" ThickCrosscuts hardwoods up to 3-1/2" thick.10" diameter.5/8" arbor.Kerf is .126".30 hook.
Oshlun 8 Stack Dado Set Set includes: Two 8" x 42 tooth x 5/8" arbor outside saws with 1/8" thick kerfs.Six 5-tooth full-body chippers (four 1/8", one 1/16" and one 3/32").Eight brass shims.Dado range is 1/8" to 3/4".Maximum RPM 5500.
Oshlun 6 Stack Dado Set Set includes: Two 6" x 30 tooth x 5/8" arbor outside saws with 1/8" thick kerfs.Six 5-tooth full-body chippers (four 1/8", one 1/16" and one 3/32").Eight brass shims.Dado range is 1/4' to 29/32'.Maximum RPM 5500.
Infiniterreg RS1 Laser Cutting Guide Easy installation: simply replace the outer blade washer of your miter saw with the laser guide unit.Does not fit 12" Ridgid, Pro-Tech, Makita LS1221 and DeWalt DW705S miter saws produced before 2005.Does not fit Porter-Cable Quick-Change, Skil and worm-drive circular saws.
Freudreg LU97R DoubleSided LaminateMelamine Blade Laser-cut anti-vibration slots reduce vibration and sideways movement in the cut, extending blade life and giving a crisp, splinter-free finish. Freud Model Diameter Teeth H = Arbor Kerf LU97R010 10' 80 TCG -3 degrees 5/8' .126' Features:Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade Designed to produce the best possible cuts in plywood and melamine with no bottom chipping.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU79R010 10' 80 HiATB 2 degrees 5/8' .094' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU95R Solid Surface Material Blades Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut, extending blade life and giving a crisp, splinter-free flawless finish.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU95R010 10' 72 TCG 0 degrees 5/8' .126' LU95R012 12' 72 TCG 0 degrees 1' .126' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Irwinreg Marathonreg 10 x 40T General Purpose Blade Blade has construction micro grain carbide tips for long life, plus a fully hardened plate to run truer longer. Irwin Model Diameter Teeth H = Arbor Kerf 14070 10' 40 ATB 20 degrees 5/8' .095' Precision tensioned and balanced for an accurate and true cut.With reinforced shoulder for added durability.5/8" arbor. Designed for use on DeWalt, Bosch, Makita, Delta, Milwaukee, Hitachi and other professional saws.
Forrest Woodworker II General Purpose Blade The Woodworker II is a top-quality general purpose blade. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings.Specifications:40 teeth.1/8' kerf.Teeth have 15º alternating tooth bevel.20º face hook for easy feed.Carbide tipped.5/8' arbor.Produces smooth as sanded cuts.
Freud LU80R Ultimate Plywood and Melamine Blade Designed to produce the cleanest cuts possible in plywood and melamine with no bottom splinter.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU80R010 10' 80 HiATB 2 degrees 5/8' .126' LU80R012 12' 96 HiATB 2 degrees 1' .126' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freudreg LU74R Thin Kerf Ultimate Crosscut Blade Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut, extending blade life and giving a crisp, splinter-free flawless finish.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU74R010 10' 80 ATB5 degrees 5/8' .098' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freudreg LM72R Rip Blade Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut, extending blade life and giving a crisp, swirl-free flawless finish.Specifications Freud Model Diameter Teeth H = Arbor Kerf LM72R010 10' 24 FT 20 degrees 5/8' .126' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU89M NonFerrous Metal Cutting Blade This heavy-duty non-ferrous metal cutting blade produces and excellent finish. Freud recommends use of a liquid lubricant, such as a spray of WD-40 every four or five cuts. Freud Model Diameter Teeth H = Arbor Kerf LU89M010 10' 72 TCG 13 degrees 5/8' .122' Micrograin carbide tips thick enough for several re-sharpenings.Tri-metal brazing for long life and clean cuts.Kickback reducing design.Freud recommends ample use of a liquid lubricant when cutting. This can be accomplished with a squirt of WD-40 or other lubricant every four or five cuts, or with an industrial drip system. Wax sticks are not recommended..5mm triple chip height.-7º hook angle.10" blade has 5/8" arbor..122 kerf..098 plate.
Freud LU96R Thin Kerf LaminateMelamine Blade Get a smooth cut with less horsepower! Thin kerf blades are ideal for saws under 3HP. Designed to produce chip-free cuts in double-sided laminates. Specifications Freud Model Diameter Teeth H = Arbor Kerf LU96R010 10' 80 TCG -3 degrees 5/8' .091' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU88R Thin Kerf Crosscut Blade Get a smooth cut with less horsepower! Specially designed to produce smooth, clean crosscuts on saws under 3HP.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU88R010 10' 60 ATB 15 degrees 5/8' .090' Features:Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU86R Thin Kerf General Purpose Blade Specifically designed for saws under 3.5 horsepower, Freud thin kerf blades run smooth and cut clean even after years of service. Specifications: Freud Model Diameter Teeth H = Arbor Kerf LU86R010 10' 40 ATB 13 degrees 5/8' .094' Features:Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU83R Thin Kerf Combination Blade Get a smooth cut with less horsepower! Designed to produce clean crosscuts and fast rips on saws under 3HP.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU83R010 10' 50 Comb. 5 degrees 5/8' .091' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU87R Thin Kerf Rip Blade Get a smooth cut with less horsepower! Designed to produce clean, fast rip cuts on saws under 3HP.Specifications Freud Model Diameter Teeth H = Arbor Kerf LU87R010 10' 24 ATB20 degrees 5/8' .094' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freud LU91R Thin Kerf Sliding Compound Miter Saw Blade Designed specifically for sliding compound miter saws. Negative hook angle and anti-vibration technology provide smooth, safe cuts. Also perfect for radial arm saws.Specifications Freud LU91R010 10' x 60T Thin Kerf Sliding Compound Miter Saw Blade Freud LU91R012 12' x 72T Thin Kerf Sliding Compound Miter Saw Blade Freud Model Diameter Teeth H = Arbor Kerf LU91R008 8-1/2' 48 ATB -5 degrees 5/8' .090' LU91R010 10' 60 ATB -5 degrees 5/8' .090' LU91R012 12' 72 ATB -5 degrees 1' .090' FeaturesApplication-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.
Freudreg Box Joint Cutter Set Unique tooth design delivers clean cuts through end grain.Cuts perfectly square pins and flat-bottomed slots.8" diameter.5/8" arbor.Carbide teeth.For use with table saw only.Maximum RPM 9,000.Includes convenient storage case and instructions.
Laminate Cutting Guide Easily slips under rip fence on any table saw.Raises stock up and prevents it from jamming under rip fence.Also holds stock down and prevents it from rising off blade.Stock is held high enough for use with a push stick.Measures 26" long.Easy installation.
SawJaw Blade Tool Securely holds blades while they are being installed or removed.Protects carbide teeth from being chipped or damaged, and protects against hand injury.Convenient storage.Works with most 10" right- or left-tilt contractor and cabinet table saws, and some radial arm and miter saws.Plastic.Made in USA.
TableTop Lubricant Simply spray onto metal tabletop surface, let dry and buff lightly with soft cloth; re-apply and let dry.Contains no silicone or oils.Available in two sizes.
The Complete Tool Saver System TopSaver tabletop treatment is a surface cleaner, degreaser, rust remover, sliding lubricant and surface protectant.BladeSaver water-based cleaner breaks down the acids contained in pitch resin for easy removal from saw blades and router bits. Non-flammable.Router Bit Lubricant reduces cutting heat and friction for improved routing. Contains no silicones or oils.Dri-Tool Lubricant allows moving parts like screw adjustments and slide mechanisms to travel with ease.OptiCut-XL is a cutting and cooling lubricant for saw blades.
Freud LU82M Crosscut Rip Blade Freud Model Diameter Teeth H = Arbor Kerf LU82M010 10' 60 TCG 10 degrees 5/8' .126' Thick MicroGrain carbide tips.Laser cut blade body and expansion slots. Kickback reducing design.Tri-metal brazing for impact-resistant tips. Covered by Freud's Limited Lifetime Warranty.
Rockler Pitch Resin Remover Rockler products are the result of extensive scientific research and workshop experience. Our woodworking knowledge has taught us to use only the finest ingredients.Pitch & Resin Remover is easy to use!Spray and coat thoroughly all surfaces. Let stand 5-8 minutes prior to using a cloth, brush or steel wool to remove residue.A shallow baking pan works well for soaking saw blades, plane knives and other flat cutting instruments.Use a jar-shaped container for soaking router bits, shaper cutters and drill bits.When buildup is heavy, re-apply as necessary.This solution may be sprayed to reach crevices and locations where additional cleaning is required.Dry tools thoroughly to avoid rusting while in storage.CAUTION: Not intended for consumption. If ingested, rinse mouth, give water and seek medical attention. Persons with allergic reactions should wear gloves to avoid skin contact. KEEP OUT OF REACH OF CHILDREN.
Forrest Chopmaster Saw Blades High angle alternate bevel (HiATB) tooth design and negative hook angle make this blade ideal for sliding compound miter saws and radial arm saws.Heavier than normal steel plate maintains maximum stability.Made with double-hard C-4 Submicron Carbide for up to 300% longer life.Negative face hook adds to optimum rigidity.Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality.Four ATB teeth and one FT tooth arrangement provides steady, clean cuts with no bottom splintering.26317 - 8' Blade, 3/32' Kerf, 60 Tooth20018 - 10' Blade, 7/64' Kerf, 80 Tooth29628 - 12' Blade, 1/8' Kerf, 80 Tooth
Table Saw Blade Holder
TruCut Aluminum Blade Insert System Offers complete support of workpiece to the blade, especially beneficial when cutting small or narrow pieces.Machined from thick aluminum, then anodized — won’t twist, warp or bend.Includes kerf insert made of durable phenolic material.Replacement kerf inserts sold two per package (one size fits all the plates).
PorterCable Razor Carbide Saw Blades Developed in sawmills and high-production factories, the Porter-Cable razor carbide saw blades give you the most advanced saw blade technology.Blades feature thin kerf C3 micrograin tungsten carbide tips to make cutting easier.Increased plate strength has more rigidity and less deflection.Laser-cut plate has tighter tolerances and more precision.Made from fully hardened and flattened steel plate.New anti-kick tooth design works as a raker tooth to help clean cut while preventing kickback.10" 50 tooth blade smoothly cuts trim, molding, plastic and wood faster than conventional finishing blades.7-1/4" 20 tooth razor blade cuts dimensional lumber, plywood and OSB faster and more cleanly than conventional framing blades.