Routers and Accessories Bushing and Edge Guides

Rockler > Bushing and Edge Guides > Routers and Accessories

Bushing and Edge Guides from Rockler Select Subcategory Here Bushing and Edge Guides Bushing and Edge Guides Dovetail Jigs and Templates Leigh Dovetail Jigs and Accessories Router Accessories Chamfer Router Bits Cove and Round Over Router Bits Decorative Profile Router Bits Door, Drawer and Table Edge Router Bits Flush Trim Bits Joinery Router Bits Miniature Router Bits Molding Router Bits Plunge, Round Nose, Core Box and V-Groove Router Bits Router Bit Accessories Router Bit Sets Slot Cutters Specialty Router Bits Stile and Rail / Raised Panel Router Bits Straight and Rabbeting Router Bits Router Plates and Bases Router Templates and Jigs

Jasper Model 300 Circle Cutting Attachment The built-in scale is calibrated to read direct tabletop diameters when a 1/2' router bit is used. Made of acrylic.
Turnlock Baseplate and Metal Bushing Set Includes the revolutionary 7" TurnLock baseplate:Guide bushings lock in with a simple twist — no more squeezing your fingers into the router base to loosen the nut.Install the baseplate once and and your bushings will always be perfectly centered. Centering pin works for 1/4" and 1/2" collets.Includes mounting hardware.Baseplate is pre-drilled to fit a huge variety of routers with up to 7-1/4" diameter baseplates.Also works with other TurnLock accessories.Bushing sizes:OD: 5/16", ID: 1/4", length: 5/32"OD: 3/8", ID: 9/32", length: 5/16"OD: 7/16", ID: 11/32", length: 3/16"OD: 7/16", ID: 11/32", length: 9/16"OD: 1/2", ID: 13/32", length: 5/16"OD: 5/8", ID: 9/16", length: 3/16"OD: 5/8", ID: 9/16", length: 9/16"OD: 51/64", ID: 5/8", length: 9/16"
TurnLock Router CircleEdge Guide Features TurnLock base plate for easy, tool-free installation.Includes 7" clear base plate, centering pin, 5/8" TurnLock bushing, three mounting screws, edge guide, center pivot slide, nail and instruction manual.Accepts most 6" and 7" diameter routers.
Rockler Router Guide Bushing Kit Kit includes 1/4" and 1/2" shank custom centering bits for accurate template centering every time, two lock nuts and seven of the most commonly used template guides.Includes the following template guides:1/4" (inside) x 5/16" (outside)9/32" (inside) x 3/8" (outside)11/32" (inside) x 7/16" (outside)13/32" (inside) x 1/2" (outside)17/32" (inside) x 5/8" (outside)21/32" (inside) x 3/4" (outside)5/8" (inside) x 51/64" (outside)Template guides fit perfectly in any base with a 1-3/16" diameter center hole.Comes in handy plastic storage case.