Router Tables Packages & Accessories Router Table Accessories

Rockler > Router Table Accessories > Router Tables Packages & Accessories

Router Table Accessories from Rockler Select Subcategory Here Router Table Accessories Standard Router Package Router Lift Table Packages Tablesaw package Router Table Accessories à la Carte

Router Plate Templates Templates are made of 1/2’’ MDF material. Instructions are permanently affixed to the template. We suggest using our 1/2’’ Pattern Cutting Bit #33536 (sold separately, but other 1/2’’ pattern bits also work. For best results, mount the template to the desired location of the router plate installation using double-face tape (sold separately).
Fulcrum Pin with Guard and Dust Port
RocklerKreg Pocket Hole System We’ve teamed up to make it possible to create pocket holes quickly and easily -- even on long or large workpieces!Pocket hole joinery gives you one of the strongest, fastest, simplest - and, in short, best -- methods of joinery. It allows you to draw joints together and keep them in place while the glue dries -- without the need for clamps. Not only does this help eliminate alignment problems that clamps sometimes cause, it also cuts down on the time needed for completing your joinery. Used in combination with other joinery methods, you’ll often achieve the strongest possible joints. Pocket hole joinery is ideal for every application from tabletops and face frame cabinets to stairs and picture frames. This exclusive system, which combines the Kreg Pocket Hole System and Rockler’s plate and exclusive router table, will give you unparalleled accuracy and efficiency. By utilizing the system with our router table, you’ll get the maximum working area -- giving you added stability when working with long or large workpieces. It also works as a stand-alone unit.An added advantage of this system is that it allows you to clamp and drill from one side. This system is designed for use with 1/2' to 1-12' thick materials. Choose the package that meets your needs: The Standard Pocket Hole System includes plate, clamp, and clamp bar. The Master Pack includes all the above plus a Kreg step drill bit, 3/8' stop collar, and 100 screws.
Rockler Jig Saw Plate
Porter Cable Oscillating Spindle Sander Plate
Bench Dog ProGuard Freehand Router Bit Guard Stock clearance under guard: 1-1/2" thick. Mounts to almost any plate or routertop (requires drilling and tapping two holes).
Deluxe 4Piece Router Accessory Kit Includes:Double Featherboard KitDeluxe Dust Port (39663)Two Fence FeatherboardsDouble Featherboard Kit:Features two easy-to-grip locking knobs that safely position featherboard anywhere along the miter track.Unique, expandable miter track clamps provide maximum holding power.Can be used with table saws, router tables, drill presses — any tool with a standard 3/8" x 3/4" miter slot.Can also be used as a standard height table featherboard.Deluxe Dust Port:Fits any Rockler router fence.Extra-tall height makes it perfect for use with the Deluxe Router Fence (30136).Can be used with the Incra Jig (25971) and other incremental adjustment systems — just drill into the flat surface to connect your jig.2-1/2" O.D. / 2-1/8" I.D. dust port.Includes baffle for concentrated suction when used with standard-height fence.Slips onto any Rockler router fence with just two knobs.
Rockler Deluxe Router Fence The Deluxe Router Fence is the perfect companion to Norm Abrams Deluxe Router Table Plan and DVD (32942).Measures 35"W x 8"H overallBit opening on full length top fence is 4"W x 3"HAdjustable faces are 3"H x 17-1/2"MDF faces are surfaced with melamine for easy slidingL-shaped aluminum fence is 3"W x 5"H x 35"LT-tracks in fence faces allow attachment of accessoriesWorks with all Rockler router tables
MastRLift Router Lift Mounting Plate Now change bits and adjust the depth of cut in increments of less than 1/128, all from the top of the table! Designed to accomodate Porter-Cable 7518 motor. Mast-R-Lift is precision-engineered to within .002 tolerance and CNC-machined from 1 solid aluminum to eliminate bending and sagging. Built-in insert adjusters allow for snugging the lift in your table for a perfect fit, while the built-in leveling system will not wear into the table's recessed opening. Plate measures 9-1/4 x 11-3/4 x 3/8. Adjustments are made with a drop-in speed handle that's elevated from the table. One rotation of the handle equals 1/16' so you can make both super-fine and major adjustments quickly and easily. Built-in insert adjusters allow for snugging Mast-R-Lift into your table for an absolutely perfect fit, while the built-in leveling system will not wear into your table's recessed opening. Changing bits with Mast-R-Lift has never been easier! All your router bits are changed from the top of the table - the quickest and safest way to change bits. Other features that ensure smooth operation include a carriage that rides on four SAE 841 sintered bronze bearings within two ground and polished guide shafts. Adjustments are made with a drop-in speed handle that’s elevated from the table for safety. Mast-R-Lift Accessories (sold separately)Tab-Loc Inserts (24686) Our 4-piece locking insert kit includes 1/4', 1/2' and 1-1/4' inserts for template bushings plus a 2 -1/2' insert. Sold separately. (Mast-R-Lift comes with a 1-1/2 insert.) Phenolic resin. Eliminator Chuck (22705) Adjust bits with one hand! No more knicking your fingers and hands with the clumsy two-wrench system. (See image on right.) This chuck accepts 1/2 shank router bits. Adapter available for 1/4' bits. (90497) Installation Template (60804) Fit your Mast-R-Lift perfectly with our 1/2' thick MDF template! Designed to work with our 1/2' pattern bit (33536) or other 1/2' pattern bits (shims may be required). Mount with double-faced tape. (50492) Mast-R-Lift is designed to accommodate Porter-Cable 75182 motors (sold separately). The Mast-R-Lift cannot be adapted for Plunge Routers. Adapter rings (sold separately) are available for PC 690, PC 890, Bosch 1617/1618 EVS Router DeWalt 610 Router Makita 1100-01 Router
Smartlift Digital Router Lift Named a Popular Woodworking Best New Tool in 2004!Digital display recessed into the top plate provides precise height adjustments guaranteed accurate to within .001".“Zero out” any router bit and dial it up to a predetermined height. Do your “trial-and-error” cut the first time you ever use that bit; after that, zero out the bit and run it up to the predetermined height and start cutting.Digital display can be viewed in SAE to .001" or metric to .01 mm.LCD display automatically shuts off after 15 minutes to conserve battery life.Absolute encoder records the last setting that was in memory when you turn the unit off or turn the handle.Changing bits is easy with a 3-3/4" range of travel from top to bottom. This makes it possible to raise the router high enough to expose the bit chuck and gain easy access for router bit removal in seconds.Height adjustment handle adjusts the router carriage, router motor and bit in 1/16" increments.Eliminates backlash with a continuously self-adjusting anti-backlash direct-drive system.All moving components are either stainless steel or completely shielded from dust and debris, eliminating wear and parts abrasion.Special “thread-clearing” feature prevents particles from entering the internal mechanism.Snuggers and corner leveling pads are accessible from under the router table.Plate measures 9.240" x 11.740" with 3/4" radius corners; fits into a standard 9-1/4" x 11-3/4" opening with a ledge milled to a depth of 7/16" x 1/2" wide.With the insert ring removed the 3-5/8" opening in the top plate is large enough to accommodate even the largest router bits, including 3-1/2" panel raisers.Includes three insert rings with openings of 1/2", 2-1/2" and 1-3/8" to allow the use of a guide bushing.5-piece insert ring set (sold separately) has openings of 3/4", 1", 1-1/2", 2" and a blank insert that can be custom drilled.Fits either the Porter-Cable 7518 or 7519 (3-1/4 HP electronic soft start, variable or fixed speed) router.Adapter sleeve (sold separately) accommodates all of the most popular fixed-base routers, including Porter-Cable 690 and 890 series; DeWalt 610, 616 and 618; Bosch 1617 and 1618.
Router Table Jointing Shims 6 Pack Grey, Blue and White Shims can be combined to shave .070' off an edge. Slip one or more of the shims between the aluminum fence and the MDF behind the outfeed part of your fence for edge jointing.
RocklerJessEm Router Lift FX Precision-machined 6061 aluminum unit with 3/4" thick phenolic top for durability and flatness.Plate measures 8" x 11" x 3/4" with 1/4" lip to fit Rockler’s #1 Router Table Package.Insert plate center hole (3-5/8" overall diameter) is machined to accept larger raised panel bits and includes 1-1/2" insert ring.Fits these routers: Porter-Cable 690/890 series, Bosch 1617-1618, DeWalt 610, 616 and 618.Router not included.
Jessem MiteR Slide and MastRFence Mite-R-Slide performs precision-machined square or angled copy cuts, crosscuts and other milling operations with unbeatable accuracy. Designed for use with Mast-R-Fence only.Mast-R-Fence features a dual track fastening system with adjustable scales that can be set for a zero reference and fast, repeatable setups. Fence glides smoothly in tracks and firmly locks with lock-down knobs.Precision machined 6061 aluminum.Slide and fence conveniently fit Rockler’s exclusive router table (sold separately).
Fourpiece router accessory kit and Featherboards Four-piece Router Accessory Kit Includes 2-1/2 integrated dust collection port, 2 infeed/outfeed fence featherboards and table featherboard (featherboards also sold separately below). Featherboards feature easy-to-grip locking knobs that provide safe positioning anywhere along fence or in miter slot track. Includes new, improved miter gauge locking keys. Table featherboard is ideal for use with any tool that has a standard 3/8 x 3/4 miter slot. Expandable miter track bars provide maximum holding power. 5 max. adjustability. Fence featherboard works for both infeed and outfeed applications. Mounts with heavy-duty 5/16-18 T-bolts (included) and fits all Rockler T-slot fences. For material up to 1-1/8 thick.
Rockler Router Table With Folding Legs Holds up during use, folds up for transporting or stowing. 'Rugged Buddy' tool stand is made of tubular steel with skid-proof rubber feet. Sold separately. See our complete description of our MDF Router Table with anodized aluminum fence.