Turning Tools and Accessories Turning Hand Tools

Rockler > Turning Hand Tools > Turning Tools and Accessories

Turning Hand Tools from Rockler

Robert Sorby Hollowmaster The Robert Sorby Hollowmaster has a flat underside which provides exceptional control and stability when hollowing and is suitable for end grain and bowl work. It is supplied with two interchangeable tips for hollowing and scraping.Unlike most conventional hollowing tools, the unique Hollowmaster comes with a meaty 3/4' flat surface. When laid on the tool rest, this gives ample support to prevent the tool from being turned over by the rotation of the wood. You are not fighting the laws of nature but removing wood with ease. It's swan neck design means that the Hollowmaster can reach those spots that are often difficult to reach. The Hollowmaster comes with a swiveling hollowing cutter and a full round scraper cutter for fine finishing. Both are easily sharpened with a diamond file and can be replaced when need be.Sorby Hollowmaster Instructions
Crown 5 Piece Full Size Turning Set Set includes:3/4' roughing gouge3/8' spindle gouge1/4' parting tools1/2' round nose1/2' skew chisel
10 Vessel Caliper The shape of these calipers gives easy accessibility. Their double-ended design gives easy and reliable readings to enable a consistency of wall thickness in a turned piece.
Sorby Sandmaster As the disc is spinning it also reduces the clogging of the abrasive. The Sandmaster comes complete with a Velcro covered 2" sponge pad which allows for the easy changing of abrasive discs. A variety of grits - from 60 - 400 - of aluminum oxide disc can then be quickly attached. The adjustable head which runs on a durable phosphor bronze bushing lets the turner reach even the more inaccessible spots. As an optional extra, a 3" head and discs can be easily fitted for greater efficiency. The Sandmaster becomes an even more versatile tool when the head is removed and replaced by a pigtail mandrel and goblet or bowl mop. Made of fine grade cotton these mops are an ideal medium for buffing waxes and other finishes. Maintenance and use instructions for the Sandmaster. Part Number Overall Length Handle Length 27711 11-1/2' 8-1/2'
Turning Tool Set Accurately ground, sharpened, hardened, and tempered. All have 10" handles and are 16" long overall."Turning tool Set consists of:1/2' skew1' skew3/8' gouge1' gouge1/2' spear point1/2' parting tool5/8' gouge1/2' round point
Robert Sorby Micro Tool Set Created exclusively for Rockler for small projects and pen turning. Overall length of 10", with a handle length of 7". Includes: 10mm shear scraper 8mm roughing gouge 6mm spindle gouge 1/4' round skew 1/16' parting tool
Sorby Standard Tool Set A great general-purpose set for everything from bowls to spindles to pens. Set includes: multi-tip shear scraper3/8' bowl gouge1/4' spindle gouge3/4' roughing out gouge3/4' oval skew chisel3/16' diamond section parting tool
Crown Turning Sets Crown 3 Piece Pen Turning Set - Create beautiful pens and similar projects with this 3 Piece Pen Turning Set. Includes: 1/4’‘ Bowl gouge 1/2’‘ Oval skew chisel gouge 1/8’‘ Parting toolAll pre-honed and presharpened. Ready to use straight from the box.Crown 5 Piece Mini Turning Set - With five of the most popular turning tools, this set is perfect for the beginning wood turner. They’re prehoned for immediate use. Set includes: 1/8' Gouge 1/4' Gouge 1/16' Parting tool 1/4’‘ Round nose scraper 1/4’‘ Skew chiselAll are made of high speed steel to hold an edge and last longer.
Robert Sorby RS200KT MultiTip Shear Scraper 3/4" half-flat shank is in permanent contact with the tool rest and so minimizes the impact of rotational forces.Features two hollowing tips which are fitted to a swivelling clamp.Swivelling clamp allows for straight hollowing and undercutting under a rim.One tip is rounded to create a flowing shape like bowls.Second tip is pointed for squarer shapes like boxes.Second end of each HSS tip is left plain for the turner to custom shape.Also includes a scraper blade for finishing.Scraper has three different working faces making it a round scraper, a half-round scraper and a square scraper all rolled into one.Scraper can be used on the half-round shank for shear scraping.All three tips or cutters are HSS and sharpened with a diamond hone on the top.Replacement cutters available.Separate beading, coving, and recess cutters (also called dovetail cutters) available separately.Includes hex wrench and hex-head bolts.
Robert Sorby Parting Tools Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted project.Fluted Parting Tool - This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibers to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. Description Size Code Overall Length Handle Length Profile Standard Parting Tool 1/8"- 3mm 830H 13 1/2" 8-1/2" Diamond Parting Tool 3/11' - 5mm 831H 17' 10' Fluted Parting Tool 3/16"- 5mm 832H 18 1/2" 12"
Robert Sorby RoundSide Cut Scraper Designed for blending the parallel side wall and the curved bottom of vessels and boxes together. Excellent for undercutting the rims of small bowls. Size - 3/4' - 19mm Overall Length - 18-1/2' Handle Length - 10'
Robert Sorby Extra Heavy Duty Scraper Excellent for large bowl work, platters and deep hollowing. Massive in section, this scraper is designed to reduce vibration and be stable in use. Because of its sheer bulk, this scraper can be used with a large overhang from the tool rest. Blade: 1-1/2'(38mm) x 3/8'(10mm)
Robert Sorby 45186 Shear Scrapers Shear scraping is a recently enhanced method of woodturning which relies on the presentation of the scraper at a shear angle. The technique offers some significant advantages over conventional scrapers. 45° Shear Scrapers - The 3/8' square shank sits firmly on the tool rest and presents the cutter at a 45° angle to the workpiece when used in either direction. This is due to the unique cutter seating position. Each tip can be re-positioned several times before re-sharpeining becomes necessary. At the optimum angle of 45°, the slicing action is safer and produces a superior finish. Sanding is often unnecessary. The risk of the cutter digging-in is virtually eliminated.Spare 826C and 827C HSS cutters are available and are fully interchangeable. 826C HSS Cutter 827C HSS Cutter
Robert Sorby Bead Tool Will cut perfect semi-circular beads. Nose design permits multiple beads.Size - 1/4' - 16mm Overall Length - 13-1/2'
Robert Sorby Sizing Tool Designed for the woodturner to measure wall thicknesses, internal and external dimensions. Required diameter can be pre-set by locking sizing tool to parting tool with the aid of two thumb screws. Suitable for use with the following parting tool: Item #47688 - 3/16' Diamond Section Parting Tool
Robert Sorby Bedan Used in the same way as the beading and parting tool, the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.
Robert Sorby Spindlemaster Taming the skew is perhaps the most common of problems encountered by the woodturner. The digs-ins which ensue from incorrect presentation cause many turners to avoid using the skew chisels and consequently reduce their skills and limit their opportunities of turning between centres. The new Spindlemaster does away with this problem. Its design is flat on one surface, and the oval on the other making dig-ins a thing of the past. It is easy to use for even the least experienced turner. In addition to doing the regular planning job of the skew chisel, the Spindlemaster will also cut both beads and coves with the greatest ease. The Spindlemaster gives a fine finish every time. That is a particular advantage when working on soft woods like pine which normally leave a very coarse finish. Micro Spindlemaster - Since it's introduction, the Spindlemaster has become the favorite tool of many turners. That is not surprising when you consider it's advantages - it has no corners to dig in, it planes, beads, coves and trims end grain, and it's polished bevel gives a superb finish from the tool especially on softer woods. Now this micro version has been introduced with all the same advantages. That makes it ideal for those specializing in miniature work, bobbin makers and pen turners. The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer. Size Part Number Overall Length Handle Length 1/2 - 13mm 24048 6-1/4 10" 3/4 - 19mm 24058 16-1/4 10" 1 - 25mm 24066 18-1/4 12" Micro Spindlemaster 27702 10 6-1/4
Robert Sorby SquareEnd Scraper For finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, e.g. diamond point. Size Code Overall Length Handle Length 3/4' - 19mm 823H 16' 10' 1' - 25mm 823H 18-1/2' 12'
Robert Sorby Ring Tool Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels. These tools produce an unrivaled surface finish on end grain. Ideal for goblets and egg cups. Comes complete with full instructions.Size - 1/2' - 13mmOverall Length - 18-1/4' Handle Length - 12'
Robert Sorby RoughingOut Gouge Recommended for the initial turning of uneven or square stock to round. The shape of the roughing-out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece. Not for use on bowl grain projects. Size Code Overall Length Handle Length 3/4' - 19mm 843H 19' 12' 1-1/4' - 32mm 843LH 21' 14'
Robert Sorby Oval Skew Chisel Delicately balanced tools that are the planes of the spindle turners kit. Designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrade and chair legs. These tools are indispensable if a fine finish is required from the tool. Size Code Overall Length Handle Length 1/2' - 13mm 809H 16-1/4' 10' 3/4' - 19mm 809H 16-1/4' 10' 1" - 25mm 809H 18-1/4" 12" 1 1/4" - 32mm 809H 18-1/4" 12"
Router Methods of Work" has long been the premier forum for woodworkers to share their best tips. Router Methods of Work provides hundreds of innovative methods to use the most versatile of all woodworking tools. From dado basics to fixtures for complex circular work, Router Methods of Work has the techniques to expand the capabilities of your router. Some of the topics covered: Router setup and maintenance Router tables and mounts Router joinery Router dovetails Fluting, reeding, and milling Fixtures for curved and circular work Table of ContentsIntroduction Chapter 1: Router Setup and Maintenance Chapter 2: Router Tables and Mounts Chapter 3: Bases and Alignment Fixtures Chapter 4: Routing Dadoes Chapter 5: Routing Dovetails Chapter 6: Routing Mortises and Cavities Chapter 7: Router Joinery Chapter 8: Fixtures for Curved and Circular Work Chapter 9: Fluting, Reeding and Milling Chapter 10: Router Methods and Odd Jobs Index\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Tool Books and Videos>Routing Books and Videos\|http://images.rockler.com/rockler/images/24900-01-80.jpg\|http://images.rockler.com/rockler/images/24900-01-200.jpg 6099\|http://www.rockler.com/product.cfm?page=6099&sid=AFF25\|Finishing Book\|The Best Tips from 25 Years of Fine Woodworking edited illustrated by Jim Richey"Methods of Work" has long been the premier forum for woodworkers to share their best tips. Finishing Methods of Work combines the wisdom of finishing sages such as George Frank with tips from amateurs and pros to provide a unique resource for anyone who finishes wood. Some of the topics covered: Choosing a finish Nontoxic finishes Tools of the trade Coloring wood Troubleshooting finishing problems Repairing damaged and old finishes Table of Contents Introduction Chapter 1: Selecting Applying Finishes Chapter 2: Nontoxic Finishes Chapter 3: Surface Preparation Repair Chapter 4: Tools of the Trade Chapter 5: Coloring Wood Chapter 6: Specialty Cracked Finishes Chapter 7: Spraying Tips Chapter 8: Preventing Fading Chapter 9: Troubleshooting Finishing Problems Chapter 10: Repairing Damaged Old Finishes Index\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Finishing Books and Videos\|http://images.rockler.com/rockler/images/24891s-80.jpg\|http://images.rockler.com/rockler/images/24891.jpg 6100\|http://www.rockler.com/product.cfm?page=6100&sid=AFF25\|Workshop Methods of Work Book\|The Best Tips from 25 Years of Fine Woodworking edited illustrated by Jim Richey"Methods of Work" has long been the premier forum for woodworkers to share their best tips. Workshop Methods of Work provides hundreds of imaginative shop strategies, setups, jigs, and techniques to help solve your most vexing woodworking problems. Some of the topics covered: Shop setup Workbenches, vises, and sawhorses Portable power tool fixtures Measuring, marking, and layout Gluing Clamping Table of Contents Introduction Chapter 1: Shop Setup Chapter 2: Workbenches, Vises Sawhorses Chapter 3: Shopmade Hand Tools Hand-Tool Fixtures Chapter 4: Sharpening Grinding Chapter 5: Portable Power-Tool Fixtures Chapter 6: Measuring, Marking Layout Chapter 7: Sanding Chapter 8: Gluing Chapter 9: Clamping Index\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Workshop Books and Videos (books)\|http://images.rockler.com/rockler/images/24873-01-80.jpg\|http://images.rockler.com/rockler/images/24873-01-200.jpg 6119\|http://www.rockler.com/product.cfm?page=6119&sid=AFF25\|Violin Making A Guide for the Amateur\|By Bruce OssmanREVISED 2nd Printing67 pages, 8.5x11, soft coverMake beautiful music with your own violin masterpiece. New, simplified process leads to great-sounding results Use common woods tools Full size pattern templates Hundreds of detailed illustrations\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Project Idea Books and Videos\|http://images.rockler.com/rockler/images/35347-01-80.jpg\|http://images.rockler.com/rockler/images/35347-01-200.jpg 6124\|http://www.rockler.com/product.cfm?page=6124&sid=AFF25\|The New Yankee Workshop Companion to the Public Television Series\|by Norm AbramCelebrated craftsman Norm Abram is the master carpenter for public television's This Old House and the host of The New Yankee Workshop; his legendary wood-working skills, ingenuity, and inspired teaching have guided millions of viewers through the process of home renovation. Here, he invites you into his "New Yankee Workshop". Demonstrating traditional craftsmanship, and using the speed and accuracy of power tools, Norm shows you how to construct simple, elegant furniture with ease and confidence. In this comprehensively illustrated volume, Norm explains how to: set up shop and choose the right tools and materials create a bathroom vanity, bedside table, blanket chest, bookcase, candle stand, chest of drawers, drop-leaf table, hutch, medicine cabinet, slant-front desk, trestle table, and workbench use high-quality finishing techniques to protect and beautify your projectsContaining the lifelong wisdom of an expert, along with practical step-by-step information, The New Yankee Workshop is the classic resource for the home woodworker.Also available by Norm Abram in the New Yankee Workshop series:Classics from the New Yankee WorkshopThe New Yankee Workshop: Outdoor Projects\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Furniture and Furniture Making>Furniture Project Books and Videos\|http://images.rockler.com/rockler/images/68650s-80.jpg\|http://images.rockler.com/rockler/images/68650.jpg 6154\|http://www.rockler.com/product.cfm?page=6154&sid=AFF25\|PewterLook Backplate Knobs and Pull Sold out\|The popular spoon pull and matching knob with white ceramic insert look great together. Combine the backplate with any knob to create completely different looks. Spoon pull has a 3' boring. The 1-1/4' knob and rope knob have 3/4' projections.Check out our Exclusive JIG_IT for installing drawer pulls. Great for setting up your screw holes for drawer pulls.\|Hardware>Knobs and Pulls>Discontinued Knobs and Pulls>Discontinued Kitchen Knobs and Pulls\|http://images.rockler.com/rockler/images/43484s.jpg\|http://images.rockler.com/rockler/images/43484.jpg 6169\|http://www.rockler.com/product.cfm?page=6169&sid=AFF25\|Picnic TableBench Combo Plan\|Build two great projects from one plan. you get a sturdy table for picnic diners that instantly converts to two benches for outdoor relaxing. This plan includes all the details you need to build the projects shown. It has: Detailed exploded views Step-by-step instructions Elevations drawings Complete material list Piece-by piece required matchingApproximate finished size: 60' long x 18' deep.Materials and hardware not included.\|Plans, Books, CD's, DVD's and Videos>Woodworking Plans>Yard and Garden Outdoor Plans\|http://images.rockler.com/rockler/images/30299-03-80.jpg\|http://images.rockler.com/rockler/images/30299-03-200.jpg 6174\|http://www.rockler.com/product.cfm?page=6174&sid=AFF25\|Accuride Keyboard Slides Series 2109\|These Accuride Keyboard Slides feature variable height adjusting brackets to accommodate nearly all keyboards. Also an excellent choice for pencil drawers. The mounting brackets adjust in 7/16' increments from 2-3/8 to 3-11/16' . These black slides have steel ball bearings for effortless movement plus friction disconnect and detent hold-out features. Rated for 75 lbs. 3/4 extension. Price is per pair of slides.\|Shop by Project>Kitchen>Drawer Hardware>Ball Bearing Drawer Slides\|http://images.rockler.com/rockler/images/36274-01-80.jpg\|http://images.rockler.com/rockler/images/36274-01-200.jpg 6176\|http://www.rockler.com/product.cfm?page=6176&sid=AFF25\|Custom CuttoFit Cabinet Plywood End Panels\|These cut-to-fit panels are designed to match our custom doors and drawer fronts. Each panel is made of available in Maple, Red Oak, Ash, Cherry, Hickory and Matte White laminate. Your first step in refacing your frames is to resurface the end panels. Since they are cut-to-size, you need only: apply glue to the surface fit end panel, making sure it is flush use finishing nails to secure then seal the edges.To order, first determine the number of panels you will need, and measure each piece for precise to be flush both top and bottom and side to side. Red Oak Maple Ash Cherry Hickory Matte White\|Hardware>Cabinet Refacing\|http://images.rockler.com/rockler/images/32705s.jpg\|http://images.rockler.com/rockler/images/32705.jpg 6182\|http://www.rockler.com/product.cfm?page=6182&sid=AFF25\|Cast Brass Caster\|Item # 68742 and 68924- casters have round sockets.Item #68718- caster has a square socket 1' x 1' . p> Price per pair.\|Hardware>Casters\|http://images.rockler.com/rockler/images/72165s.jpg\|http://images.rockler.com/rockler/images/72165.jpg 6183\|http://www.rockler.com/product.cfm?page=6183&sid=AFF25\|Claw Feet Sockets\|Claw feet sockets made of wrought steel with an Antique English finish. Price per pair.\|Hardware>Casters\|http://images.rockler.com/rockler/images/84137s.jpg\|http://images.rockler.com/rockler/images/84137.jpg 6184\|http://www.rockler.com/product.cfm?page=6184&sid=AFF25\|English Country Leg With Foot\|2-3/4' x 35-1/4'. Top is square, 14' long.\|Wood Products>Table Legs, Pedestals and Bun Feet>Wood Table Legs and Pedestals\|http://images.rockler.com/rockler/images/43433-th.jpg\|http://images.rockler.com/rockler/images/43433-md.jpg 6185\|http://www.rockler.com/product.cfm?page=6185&sid=AFF25\|English Country Leg With Double Square Ends\|2-3/4' x 35-1/4'. Top and bottom\|Wood Products>Table Legs, Pedestals and Bun Feet>Wood Table Legs and Pedestals\|http://images.rockler.com/rockler/images/43639-th.jpg\|http://images.rockler.com/rockler/images/43639-md.jpg 6186\|http://www.rockler.com/product.cfm?page=6186&sid=AFF25\|Country French Legs\|3-3/4' x 35-1/4'. Top is square, 13' long. (reeded leg is shown)Will ship from the manufacture about 5 days after the order is processed.\|Wood Products>Table Legs, Pedestals and Bun Feet>Wood Table Legs and Pedestals\|http://images.rockler.com/rockler/images/43466-th.jpg\|http://images.rockler.com/rockler/images/43466-md.jpg 6187\|http://www.rockler.com/product.cfm?page=6187&sid=AFF25\|GrecoRoman Fluted Legs\|33/4' x 351/4'. Top is square, 10' long.\|Wood Products>Table Legs, Pedestals and Bun Feet>Wood Table Legs and Pedestals\|http://images.rockler.com/rockler/images/43515-th.jpg\|http://images.rockler.com/rockler/images/43515-md.jpg 6191\|http://www.rockler.com/product.cfm?page=6191&sid=AFF25\|Drill Press Air Blower\|A steady airflow keeps your work area dust-free. Magnetic base attaches easily to most machines. Hooks up quickly to your air hose!\|\|http://images.rockler.com/rockler/images/24378-th.jpg\|http://images.rockler.com/rockler/images/24378-md.jpg 6192\|http://www.rockler.com/product.cfm?page=6192&sid=AFF25\|Animal Hide Glue\|Made from the collagen content of animal hides. Comes in small, dry rounded particles. A good gap filling adhesive. Best results with wood having a moisture content from 4 to 6 percent. Does not become brittle. Resists heat. Sets best in work environment over 70 degrees Fahrenheit. Not waterproof Has a 10-15 minute assembly time, 3 hour clamping time. Requires the use of clamps Superior resistance to solvents Has a pot life of 4 hours after being mixed Does not creep under load Not for exterior use.\|Finishing, Sanding, and Glues>Gluing, Epoxy, Adhesives and Fillers>Wood Glues and Fillers\|http://images.rockler.com/rockler/images/46458s.jpg\|http://images.rockler.com/rockler/images/46458.jpg 6193\|http://www.rockler.com/product.cfm?page=6193&sid=AFF25\|Glue Hot Pot\|Accurate thermostatic control (can not be adjusted, just on or off). For use with animal hide glue. Operates without water jacket. Removable glue container (1 quart). 6 foot heavy duty 3 wire cord. Built like a boiler, will stand abuse. No hot spots will not burn glue. UL approved -115 volt ac.\|Finishing, Sanding, and Glues>Gluing, Epoxy, Adhesives and Fillers>Gluing Accessories\|http://images.rockler.com/rockler/images/46458s.jpg\|http://images.rockler.com/rockler/images/46458.jpg 6195\|http://www.rockler.com/product.cfm?page=6195&sid=AFF25\|Legend Goggle\|Combining style and innovative design, the Legend Goggle's exclusive integrated frame design and incorporates a cushion-soft, smoke vinyl goggle body with a semi-rigid outer frame front for improved goggle stability. The frame distributes a comfortable, even fit against the face, securely holds the lens, allows easy lens replacement. A unique venting system permits a constant flow of air over the lens to prevent fogging. Oversized spherical polycarbonate lens provides unobstructed viewing. For added protection, Legend component parts are molded of 99% UV inhibitive materials to minimize the effects of harmful UV rays. Legend protects against both hazardous impact and liquid splash. Meets ANSI Z87.1 specifications. CSA certified.\|Hand Tools and Shop Accessories>Workshop Accessories>Shop Safety>Eye Protection\|http://images.rockler.com/rockler/images/83387-01-80.jpg\|http://images.rockler.com/rockler/images/83387-01-200.jpg 6196\|http://www.rockler.com/product.cfm?page=6196&sid=AFF25\|Paint Spray Respirator\|Suitable For: Lacquer Enamel Paints, Pesticides, Welding, Dusts, Non-Oil Mists Radon Daughters. Not for use against paints containing isocyanates. Organic Vapor/N95 When fitted to a respirator facepiece, this cartridge and prefilter combination provides protection against most organic vapors and a minimum 95% efficiency against non-oil particulate aerosols. This typically includes lacquer and enamel paints, metal fumes from welding, most commercially available pesticides, as well as dust and non-oil mists. Replace the cartridges and prefilters when breathing becomes uncomfortable or you can smell or taste the contaminant or you experience nose or throat irritation.N95 (95% Efficient Protection Against Non-Oil Particulates)\|Hand Tools and Shop Accessories>Workshop Accessories>Shop Safety>Dust Safety\|http://images.rockler.com/rockler/images/46383-01-80.jpg\|http://images.rockler.com/rockler/images/46383-01-200.jpg 6198\|http://www.rockler.com/product.cfm?page=6198&sid=AFF25\|Mist and Dust Mask\|Adjustable elastic head straps are attached to a special flange providing a more consistent face seal. Unique molded-in nose pad eliminates the need for a foam nose cushion or metal adjustment clips. Specially designed inside layer of soft fiber to contact your face; not stiff or uncomfortable and will not irritate your skin. Reinforced ribs help maintain the respirators shape and face seal, even when used in hot, humid environments.\|Hand Tools and Shop Accessories>Workshop Accessories>Shop Safety>Dust Safety\|http://images.rockler.com/rockler/images/46375-01-80.jpg\|http://images.rockler.com/rockler/images/46375-01-200.jpg 6199\|http://www.rockler.com/product.cfm?page=6199&sid=AFF25\|Disposable Respirator\|Offers relief from non-toxic dusts and pollens only. The ND10B is unlike other dust masks because of its unique design and features. It is lightweight, easy to breathe through, fits easily and comfortably, inexpensive and disposable. Natural fit, no-metal nose piece to adjust or become misshaped. Less than 1/3 ounce and doesn't collapse when it becomes wet. Not NIOSH Approved.\|Hand Tools and Shop Accessories>Workshop Accessories>Shop Safety>Dust Safety\|http://images.rockler.com/rockler/images/46375s.jpg\|http://images.rockler.com/rockler/images/46375.jpg 6202\|http://www.rockler.com/product.cfm?page=6202&sid=AFF25\|Pyramid Post Caps\|White Pyramid Deck Postcap Black Pyramid Deck Postcap Brown Pyramid Deck Postcap Green Pyramid Deck Postcap Click to see our matching Lighted Pyramid Post Caps\|Shop by Project>Outdoor Projects>Deck Lighting, Post Caps and Balusters\|http://images.rockler.com/rockler/images/20919-th.jpg\|http://images.rockler.com/rockler/images/20919-md.jpg 6212\|http://www.rockler.com/product.cfm?page=6212&sid=AFF25\|Western Red Cedar Garden Arch Arbor\|Here is a stately and elegant addition to any garden! This arbor is constructed of western red cedar for beauty and durability. It stands 36'wide X 88'tall X 24' deep. Built to last, it can be painted, stained or left natural to weather to a silvery gray. Some assembly required. These items are in oversized packages and special charges will show on the next screen if you order.\|Shop by Project>Outdoor Projects>Outdoor plans>Outdoor Furniture and Garden Kits\|http://images.rockler.com/rockler/images/36662s-80.jpg\|http://images.rockler.com/rockler/images/36662.jpg 6213\|http://www.rockler.com/product.cfm?page=6213&sid=AFF25\|Deluxe Garden Glider\|This truly unique and spacious garden glider comfortably seats four and has a conveniently removable center table. Enjoy smooth, stable motion with your evening card game or a glass of lemonade on a sunny day. Sturdy top of cheerful blue with pleasing green leaf print. This glider is made of western red cedar and will take paint, stain or, left natural, weathers to a silvery gray. Measuring 71'H X 44'W X 94'L this glider will be a focal point of outdoor family fun and relaxation for years to come. Please Note: Specialized manufacturer freight zones allow Rockler to provide customized delivery quotes for every order. Please call for a special shipping quote. This item is shipped by motor freight only. Expedited shipping it not available on this item.Some assembly required. These items are in oversized packages and special charges will show on the next screen if you order.\|Shop by Project>Outdoor Projects>Outdoor plans>Outdoor Furniture and Garden Kits\|http://images.rockler.com/rockler/images/36844s.jpg\|http://images.rockler.com/rockler/images/36844.jpg 6214\|http://www.rockler.com/product.cfm?page=6214&sid=AFF25\|Rustic Cedar Furniture\|Painted, finished with our Woodburst China Oil, or left to naturally weather to a silvery gray, these lovely and versatile pieces are made from northern cedar logs which start out creamy white. Each piece has the distinctive cracks, called checking, which appear during the drying process. This beautiful furniture comes with some assembly required. Cushions not included.These items are in oversized packages and special charges will show on the next screen if you order.\|Shop by Project>Outdoor Projects>Outdoor plans>Outdoor Furniture and Garden Kits\|http://images.rockler.com/rockler/images/36636-02-80.jpg\|http://images.rockler.com/rockler/images/36636-02-200.jpg 6215\|http://www.rockler.com/product.cfm?page=6215&sid=AFF25\|Rustic Cedar 4Foot Garden Swing\|Enjoy peaceful afternoons and star filled evening skies in this quality constructed 4' American Garden Swing. The northern cedar logs, shown in natural creamy white, can be painted, stained with our Woodburst China Oil, or left to weather to a silvery gray. Some assembly required. Cushions not included.These items are in oversized packages and special charges will show on the next screen if you order.\|Shop by Project>Outdoor Projects>Outdoor plans>Outdoor Furniture and Garden Kits\|http://images.rockler.com/rockler/images/36653s.jpg\|http://images.rockler.com/rockler/images/36653.jpg 6231\|http://www.rockler.com/product.cfm?page=6231&sid=AFF25\|InDeck Lighting Disks\|From dark to dazzling with these incredible lights.These versatile, flush-mounted lights come in kits of 10 or individually. Used with standard 12 volt transformer. These lights can be walked on and even driven over. Each puck-sized, 3' diameter, light (4 watt bulb) is designed to be flush mounted in a flat bottom hole with 7/8' center through hole for wiring base. Use our #44891 3-1/8' Saw Tooth Bit and #36827 7/8' spade bit to install this light in a matter of minutes. Comes with white frosted lens.Requires transformer and wire (sold separately). Photocell 12 Volt Transformers Wire The 12V digital transformer is exterior rated. Not for use with submersible or pool/spa equipment. 12V digital transformer with built-in photocell lets you automatically turn the lighting on at dusk and off at dawn. Additional settings allow lights to automatically turn on and then off in 4, 6 or 8 hours. Exterior-Rated 12 Volt Transformers12V transformer with multiple on/off timer - lights can be set to go on/off up to two times each day! Not for use with submersible or pool/spa equipment.\|Shop by Project>Outdoor Projects>Deck Lighting, Post Caps and Balusters\|http://images.rockler.com/rockler/images/36805-01-80.jpg\|http://images.rockler.com/rockler/images/36805-01-200.jpg 6233\|http://www.rockler.com/product.cfm?page=6233&sid=AFF25\|Flat Post Caps\|Black Flat Top Deck Post Cap White Flat Top Deck Post Cap Green Flat Top Deck Post Cap Natural Brown Flat Top Deck Post Cap Click to see our matching Lighted Post Cap Fits 4' x 4' (nominal) wood posts.\|Shop by Project>Outdoor Projects>Deck Lighting, Post Caps and Balusters\|http://images.rockler.com/rockler/images/36771-th.jpg\|http://images.rockler.com/rockler/images/36771-md.jpg 6234\|http://www.rockler.com/product.cfm?page=6234&sid=AFF25\|Pyramid Deck Lights\|Green Pyramid Deck Lights Brown Pyramid Deck Lights White Pyramid Deck Lights Features include safe, low-voltage wiring for lights plus a low-maintenance, powder-coated finish over sturdy cast aluminum. For average-size decks, a light (18 watt bulb) on each corner with post caps in between is standard. Fits 4' x 4' (nominal) wood posts. Requires transformer, pigtail connector, and wire (sold separately). Black Pyramid Deck Lights Click to see our matching Pyramid Post Cap\|Shop by Project>Outdoor Projects>Deck Lighting, Post Caps and Balusters\|http://images.rockler.com/rockler/images/20908-th.jpg\|http://images.rockler.com/rockler/images/20908-md.jpg 6235\|http://www.rockler.com/product.cfm?page=6235&sid=AFF25\|Flat Deck Lights\|White Flat Deck Light Brown Flat Deck Light Green Flat Deck Light Black Flat Deck Lights Features include safe, low-voltage wiring for lights plus a low-maintenance, powder-coated finish over sturdy cast aluminum. For average-size decks, a light (18 watt bulb) on each corner with post caps in between is standard. Requires transformer, pigtail connector, and wire sold separately. Click to see our matching Flat Post Caps\|Shop by Project>Outdoor Projects>Deck Lighting, Post Caps and Balusters\|http://images.rockler.com/rockler/images/36748-th.jpg\|http://images.rockler.com/rockler/images/36748-md.jpg 6236\|http://www.rockler.com/product.cfm?page=6236&sid=AFF25\|Tight And Wide Router Bases For Porter Cable 690s\|Opening in sizes 3/4', 1-5/8', 2' and 2-1/2'are offered in clear polycarbonate material. The 1-1/8' version is the Porter Cable replacement part for your 690 router. The 1-1/8' replacement base accepts guide bushings.\|Power Tools>Routers and Accessories>Router Plates and Bases\|http://images.rockler.com/rockler/images/36588-01-80.jpg\|http://images.rockler.com/rockler/images/36588-01-200.jpg 6239\|http://www.rockler.com/product.cfm?page=6239&sid=AFF25\|Vertical Panel Saws\|This industrial saw runs on 15 amps with a 3 HP Milwaukee motor, 4 roller bearing systems, rotating saw head, adjustable rulers and a spring-loaded saw counter-balance system. Max. Cross cut length: 50'. Max. Rip Length: 96'. Max. Cut Thickness: 1-3/4'. Optional Accessories: wheels, folding stand, and extensions.\|Power Tools>Power Tools and Accessories>Panel Saws\|http://images.rockler.com/rockler/images/25474-01-80.jpg\|http://images.rockler.com/rockler/images/25474-01-200.jpg 6240\|http://www.rockler.com/product.cfm?page=6240&sid=AFF25\|Panel Pro Vertical Panel Saw\|Features a 14 amp Ryobi motor with laser guide, a 16 gauge galvanized steel frame, welded assembly, quick change rotating saw head and folding tubular steel stand. The running saw blade is always safely behind the panel while cutting and is easy to store in a limited shop space environment. Max. Cross cut length: 50'. Max. Rip Length: 96'. Max. Cut Thickness: 1-3/4'. Panel Prod Vertical saw includes one pair of wheels (25639), one vertical ruler (25673), and one horizontal ruler (25682).\|Power Tools>Power Tools and Accessories>Panel Saws\|http://images.rockler.com/rockler/images/25665-02-80.jpg\|http://images.rockler.com/rockler/images/25665-02-200.jpg 6249\|http://www.rockler.com/product.cfm?page=6249&sid=AFF25\|Accuride Keyboard Slides Series 2109\|These Accuride Keyboard Slides feature variable height adjusting brackets to accommodate nearly all keyboards. Also an excellent choice for pencil drawers. The mounting brackets adjust in 7/16' increments from 2-3/8 to 3-11/16' . These black slides have steel ball bearings for effortless movement plus friction disconnect and detent hold-out features. Rated for 75 lbs. 3/4 extension. Price is per pair of slides.\|Hardware>Keyboard Platforms and Slides\|http://images.rockler.com/rockler/images/36274-th.gif\|http://images.rockler.com/rockler/images/36274-md.gif 6278\|http://www.rockler.com/product.cfm?page=6278&sid=AFF25\|China Bristle Brushes\|80% Brown China bristle/20% Ox, chisel construction Softest formulation, fluid glide Round rust-resistant steel ferrule Treated maple wood handle\|Finishing, Sanding, and Glues>Brushes, Gloves, Tack Cloth and Supplies\|http://images.rockler.com/rockler/images/17196s.jpg\|http://images.rockler.com/rockler/images/17196.jpg 6279\|http://www.rockler.com/product.cfm?page=6279&sid=AFF25\|Angle Sash Bristle Brush\|80% Brown China bristle/20% Ox, chisel construction Softest formulation, fluid glide Round rust-resistant steel ferrule Treated maple wood handle\|Finishing, Sanding, and Glues>Brushes, Gloves, Tack Cloth and Supplies\|http://images.rockler.com/rockler/images/17211s.jpg\|http://images.rockler.com/rockler/images/17211.jpg 6280\|http://www.rockler.com/product.cfm?page=6280&sid=AFF25\|Synthetic Bristle Brushes\|Gold nylon/brown China bristle, chisel trim Softest formulation, fluid glide Round rust-resistant steel ferrule Green Shergrip elastromeric handle\|Finishing, Sanding, and Glues>Brushes, Gloves, Tack Cloth and Supplies\|http://images.rockler.com/rockler/images/17229s.jpg\|http://images.rockler.com/rockler/images/17229.jpg 6281\|http://www.rockler.com/product.cfm?page=6281&sid=AFF25\|Synthetic Bristle Angle Sash Brush\|Gold nylon/brown China bristle, chisel trim Softest formulation, fluid glide Round rust-resistant steel ferrule Green "Shergrip" elastometric handle\|Finishing, Sanding, and Glues>Brushes, Gloves, Tack Cloth and Supplies\|http://images.rockler.com/rockler/images/17245s.jpg\|http://images.rockler.com/rockler/images/17245.jpg 6287\|http://www.rockler.com/product.cfm?page=6287&sid=AFF25\|Handi Painter\|Neater than a brush or roller, won't spatter. Angled for getting into corners Clean and reuse Great for painting, staining, antiquing, sealing, pasting, waxing, and wiping.\|Finishing, Sanding, and Glues>Brushes, Gloves, Tack Cloth and Supplies\|http://images.rockler.com/rockler/images/90287s.jpg\|http://images.rockler.com/rockler/images/90287.jpg 6293\|http://www.rockler.com/product.cfm?page=6293&sid=AFF25\|EF Wood Stains\|Apply liberally with a foam brush or a paint pad applicator.Dry time is normally 2-4 hours under ideal conditions (70°F, 70% humidity).Cooler temperatures/higher humidity will prolong dry time up to 8-10 hours.If necessary, thin with 10-20% water.Coverage: 150 sq. ft. per quart. Country Pine Pecan Walnut GoldenOak ShakerMaple EarlyAmerican AntiqueOak Rosewood AntiqueCherry BlackWalnut Whitewash Blue BrownMahogany BlackCherry Espresso EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time. Note:Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.Learn to transform quality unfinished furniture into treasured heirlooms using General Finishes water base finishes step-by-step instruction video!\|Finishing, Sanding, and Glues>Stains and Dyes\|http://images.rockler.com/rockler/images/20082-01-80.jpg\|http://images.rockler.com/rockler/images/20082-01-200.jpg 6294\|http://www.rockler.com/product.cfm?page=6294&sid=AFF25\|EF PolyAcrylic Blend Top Coat\|This fabulous finish was recently rated by Fine Woodworking magazine as "Best Brush-on" in a competition of national brands. It is our standard "work horse" top coat and can be used in furniture and woodwork. Formulated to be durable and consumer friendly, it flows and levels easily and has great adhesion characteristics. It has strong sag resistance for vertical surfaces and its higher polyurethane content provides greater durability than other polyurethane/acrylic blends. Once you use PolyAcrylic Blend you will say to yourself, "Fine Woodworking was right on!" EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.\|Finishing, Sanding, and Glues>Clear Finishes\|http://images.rockler.com/rockler/images/82256-01-80.jpg\|http://images.rockler.com/rockler/images/82256-01-200.jpg 6295\|http://www.rockler.com/product.cfm?page=6295&sid=AFF25\|EF High Performance Polyurethane Top Coat\|Details:Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.Clean up with warm, soapy waterCoverage: 75 sq. ft./pint; 150 sq. ft./quart; 600 sq. ft./gallon.Thinning: If necessary, thin with 10-20% water.Direction for use:Oil based stains must be completely dry before using a water based top coat. Wait a minimum of 48 hours before applying GF High Performance.Use a foam brush or paint pad applicator. Apply liberally using smooth, even strokes going with the grain. Use enough material to provide a wet film.Sand between coats using 320 or 400 grit sandpaper. Remove dust before recoating.A minimum of 3 coats is recommended. Additional coats may be applied to increase durability and depth.EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also, when staining a large project, EF Extender helps provide more working time.Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.\|Finishing, Sanding, and Glues>Clear Finishes\|http://images.rockler.com/rockler/images/82298-01-80.jpg\|http://images.rockler.com/rockler/images/82298-01-200.jpg 6308\|http://www.rockler.com/product.cfm?page=6308&sid=AFF25\|Spray Finishing\|by Andy Charron He takes the mystery out of equipment, finishes, methods of application, coloring wood, specialty items, cleanup and troubleshooting, and explains technological breakthroughs like water-based finishes and HVLP (high volume, low pressure) systems that offer new options. Beginners and seasoned woodworkers alike will learn how to achieve a perfectly sprayed finish. Charron shows how to choose the right system and how each system works and gives a variety of techniques for using them. He tells how to set up spray booths and rooms for maximum efficiency, how to choose the right equipment, including compressors, spray guns, filters and complete systems. Charts, sources of supply and a handy material, equipment and application reference are included.\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Finishing Books and Videos\|http://images.rockler.com/rockler/images/27806s.jpg\|http://images.rockler.com/rockler/images/27806.jpg 6309\|http://www.rockler.com/product.cfm?page=6309&sid=AFF25\|More Finishes and Finishing Techniques\|Of course, the trick is choosing the right finish and applying it correctly to a surface that has been properly prepared. That's what this collection of 30 articles from Fine Woodworking will help you do. In addition to explaining how different finishes are applied, you'll learn how to remove finishes, how to mix and use stains and other wood colorants, and how to rub out a finish to perfection. In all, the articles will give you the confidence to broaden your finishing repertoire.\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Finishing Books and Videos\|http://images.rockler.com/rockler/images/91781-01-80.jpg\|http://images.rockler.com/rockler/images/91781-01-200.jpg 6321\|http://www.rockler.com/product.cfm?page=6321&sid=AFF25\|Outdoor Oil\|General Finishes Outdoor Oil is an exterior-rated penetrating linseed oil. It contains UV stabilizers, mildew prohibitors, and twice the oil contained in competing brands. We highly recommend GF Outdoor Oil for all outdoor wood projects, particularly wood furniture. It can be used by itself, over any stain, and on pressure treated wood.\|Finishing, Sanding, and Glues>Clear Finishes\|http://images.rockler.com/rockler/images/64890-th.jpg\|http://images.rockler.com/rockler/images/64980-md.jpg 6329\|http://www.rockler.com/product.cfm?page=6329&sid=AFF25\|Satin Finishing Wax\|Satin Finishing Wax is a dual-purpose product. It can be used as a polish for rubbing out new finishes or as a scratch remover for worn surfaces. It works well over both oil and water based finishes, including Danish Oil. We recommend a wet sanding process followed by buffing to a soft silky sheen.\|Finishing, Sanding, and Glues>Wood Care - Waxes and Polish\|http://images.rockler.com/rockler/images/80707-th.jpg\|http://images.rockler.com/rockler/images/80707-md.jpg 6332\|http://www.rockler.com/product.cfm?page=6332&sid=AFF25\|EF Extender\|EF Extender is used to slow down the drying time of water base finishes and stains. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.Note:Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.Learn to transform quality unfinished furniture into treasured heirlooms using General Finishes water base finishes step-by-step instruction video!\|Finishing, Sanding, and Glues>Stains and Dyes\|http://images.rockler.com/rockler/images/80728-th.jpg\|http://images.rockler.com/rockler/images/80728-md.jpg 6333\|http://www.rockler.com/product.cfm?page=6333&sid=AFF25\|EF Extender\|EF Extender is used to slow down the drying time of water base finishes and stains. Use EF Extender when conditions are extremely hot or dry. Also when staining a large project EF Extender helps provide more working time.Note: High humidity can cause the finishes to take longer to dry but will not harm the final finish. EF Stains and Top Coats are perfect for children’s toys and furniture All EF Stains and EF Top Coats are non-toxic after drying!Learn to transform quality unfinished furniture into treasured heirlooms using General Finishes water base finishes step-by-step instruction video!\|Finishing, Sanding, and Glues>Clear Finishes\|http://images.rockler.com/rockler/images/80728-th.jpg\|http://images.rockler.com/rockler/images/80728-md.jpg 6354\|http://www.rockler.com/product.cfm?page=6354&sid=AFF25\|Prelude Furniture Cleaner\|Furniture Cleaner is our strongest heavy duty cleaner with a mineral spirits base and is designed for serious cleaning applications. Apply with a dampened clean soft cloth to remove old oils, wax and grease from any wood surface. After the surface is clean, apply General Finish’s topcoats or Satin Wax to bring back luster.\|Finishing, Sanding, and Glues>Wood Care - Waxes and Polish\|http://images.rockler.com/rockler/images/19100-th.jpg\|http://images.rockler.com/rockler/images/19100-md.jpg 6356\|http://www.rockler.com/product.cfm?page=6356&sid=AFF25\|Orange Oil\|Orange Oil is by far the most popular. It can be used on any finish and does a superb job of removing everyday dirt and dust. It is often compared to lemon oil - however the big difference is that lemon oil contains mineral spirits. Orange Oil is all natural, non-combustible and made from real orange rinds. We love its fresh orange scent.\|Finishing, Sanding, and Glues>Wood Care - Waxes and Polish\|http://images.rockler.com/rockler/images/92958-th.jpg\|http://images.rockler.com/rockler/images/92958-md.jpg 6357\|http://www.rockler.com/product.cfm?page=6357&sid=AFF25\|Prelude Oil and Wax\|Oil and Wax has the same citrus base as orange oil with the addition of natural beeswax. Its recommended use is on Danish Oil finishes that do not employ a surface sealing finish. The oils will penetrate into the wood while the wax seals the surface, maintaining a beautiful, rich luster.\|Finishing, Sanding, and Glues>Wood Care - Waxes and Polish\|http://images.rockler.com/rockler/images/80485-th.jpg\|http://images.rockler.com/rockler/images/80485-md.jpg 6358\|http://www.rockler.com/product.cfm?page=6358&sid=AFF25\|EF Sanding Sealer\|EF Sanding Sealer is a fast drying water base sealer that sands easily and helps fill the pours of the wood. It dries fast, has a low odor and cleans up with soap and water.\|Finishing, Sanding, and Glues>Clear Finishes\|http://images.rockler.com/rockler/images/20990-01-80.jpg\|http://images.rockler.com/rockler/images/20990-01-200.jpg 6359\|http://www.rockler.com/product.cfm?page=6359&sid=AFF25\|JigIt Hardware Kit\|A $36.00 Value. The kit contains: 4 each of #23182 5 Star Knob 5/16' - 18tpi thru 4 each of #23846 5 Star Knob 5/16' - 18tpi stud 4 each of #71514 2' T-Knob 5/16' - 18tpi thru 1 pack of #26026 Tee-Nuts 5/16' - 18tpi (8 per pack) 1 pack of #28811 5/16' - 18tpi Threaded Insert (8 per pack) 6 each of #33965 5/16' x 1' T-Bolt 6 each of #83311 5/16' x 1-1/2' T-bolt 6 each of #33939 5/16' x 2-1/2' T-Bolt\|Hand Tools and Shop Accessories>Jigs, JIG IT's and T-Tracks>Jig Parts and T-Tracks\|http://images.rockler.com/rockler/images/26424-01-80.jpg\|http://images.rockler.com/rockler/images/26424-01-200.jpg 6367\|http://www.rockler.com/product.cfm?page=6367&sid=AFF25\|Constructing Staircases Balustrades amp Landings Building Basics Series\|By: William P. Spence128 pages, 333 color illus., 8' x 10'.A stairway is much more than a means of exiting a house--a new one can be a way of exciting your home, as you showcase dramatic spaces, grand entrances, and beautiful materials, increasing value far beyond the cost. From colorful photos of finished work to close-up illustrations of each step along the way, practical instructions and expert tips cover basic styles of stairs, balustrades, and landings. Preliminary planning guidelines provide shortcuts for any project you choose. The design section shows how to read and make drawings for basic U-shape and L-shape stairs, as well as how to decide on everything from the amount of headroom you need to choice designs from the Architectural Woodwork Institute. There's a chapter for every task: using stringers (notched and housed); making skirtboards, treads, risers, and landings; installing curved and spiral stairways; building open riser stairs and disappearing stairs--the most complete guide available.\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Home Improvement/DIY Books and Videos\|http://images.rockler.com/rockler/images/43876s.jpg\|http://images.rockler.com/rockler/images/43876.jpg 6369\|http://www.rockler.com/product.cfm?page=6369&sid=AFF25\|Carving Nature Wildlife Studies in Wood\|By: Frank Fox-Wilson192 pages (all in color), 8-1/4' x 10-3/4'.Watching the form of a living creature--such as a bird, fish, or butterfly--gradually emerge from a piece of beautiful seasoned hardwood is one of the carver's most exciting and satisfying experiences. Whether you're a skilled carver, a woodworker familiar with other aspects of the craft, or a sculptor eager to give carving a try, these 17 projects, all taken from the natural world, make a fine starting point. Ranging from the realistic to the abstract, and from freestanding sculptures to functional decorative objects, all capture the energy and the fine details that make carvings come alive. Here is information on creating that perfect fusion between subject and wood grain, on fixing your own mistakes as well as faults in the wood itself, and on judging your work at every stage. Carve a plane-leaf bowl, tree frog on a branch, heron, otter relief, cobra, and more!\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Carving and Whittling Books, CD's and DVD's\|http://images.rockler.com/rockler/images/43903s-80.jpg\|http://images.rockler.com/rockler/images/43903.jpg 6371\|http://www.rockler.com/product.cfm?page=6371&sid=AFF25\|Rustic Furniture Workshop\|By: Dan Mack112 pages (all in color), 8-1/2' x 11'."...the perfect guide for anyone working with his hands."--Log Homes Illustrated. From sticks, twigs, and other found wood--nature's beautiful treasure--put together great-looking and brilliantly simple chairs, tables, screens, and more...in just a weekend! A renowned rustic woodworker, whose love of the art is absolutely irresistible, reveals the secrets of transforming the plain into the exceptional. With his straightforward, friendly instructions and easy techniques for cutting, mortise-and-tenon joinery, and wood weaving, even the completely inexperienced can enjoy the satisfaction of making furniture. It all begins with a 7-foot ladder: all the other projects, from a four-panel room divider to a garden arbor to a bentwood armchair, build on its basic construction principles. Throughout, galleries exhibit a range of work by professionals, designed to inspire and instruct, and boxed features highlight pertinent information. A very special extra: several of the most creative specialists in rustic woodwork generously offer their personal time-tested tips on finishing, the best tools, and safety procedures.\|Plans, Books, CD's, DVD's and Videos>Books, CD's, DVD's and Videos>Outdoor Projects\|http://images.rockler.com/rockler/images/43936s-80.jpg\|http://images.rockler.com/rockler/images/43936.jpg 6378\|http://www.rockler.com/product.cfm?page=6378&sid=AFF25\|Basic arc Branding Irons\|We’ve rustled up some great new designs for our popular line of branding irons. Each lets you proudly proclaim your craftsmanship or makes a perfect gift for your favorite woodworker! Basic Arc styles all have 'Hand Crafted By' and allow up to one or two additional lines. Each line allows up to 20 characters.Overall size of burn for items 26259 and 26268 will be 1-3/4' wide x 3/4' high.Overall size of burn for items 26276 and 26284 will be 1-3/4' wide x 1' high.Available in your choice of torch or electric. Please enter the information you want on your 'Branding Iron' in the Customization Form on the next screen.Personalized branding irons are non-returnable. CANADIAN ORDERS:An additional $9.50 is added for an Electrical Branding Iron special heating unit. Per Canadian electrical standards the head is pinned and cannot be removed. Wiring and plug complies with Canadian electrical standards.INTERNATIONAL ORDERS (other than Canadian):Note: The electrical branding irons offered are designed for use within the U.S. or countries with the same electrical standards. Due to varying electrical standards, international purchasers may need to provide a converter/adaptor (from their own sources) that will convert electrical current from their local electrical service to the U.S. standard 110 volt service with 3 wire plug.\|Hand Tools and Shop Accessories>Woodburning Tools>Branding Irons\|http://images.rockler.com/rockler/images/26259-01-80.jpg\|http://images.rockler.com/rockler/images/26259-01-200.jpg 6379\|http://www.rockler.com/product.cfm?page=6379&sid=AFF25\|Arc with Tools Branding Irons\|We’ve rustled up some great new designs for our popular line of branding irons. Each lets you proudly proclaim your craftsmanship or makes a perfect gift for your favorite woodworker! Includes Handsaw and Plane images around 'Handcrafted by'. One or two additional lines can be added.Arc styles allow up to 20 characters per line. Overall size of burn for items 26304 and 26320 will be 2-1/8' wide x 3/4' high.Overall size of burn for items 26320 and 26313 will be 2-1/8' wide x 1' high.Available in your choice of torch or electric. Please enter the information you want on your 'Branding Iron' in the Customization Form on the next screen.Personalized branding irons are non-returnable. CANADIAN ORDERS:An additional $9.50 is added for an Electrical Branding Iron special heating unit. Per Canadian electrical standards the head is pinned and cannot be removed. Wiring and plug complies with Canadian electrical standards.INTERNATIONAL ORDERS (other than Canadian):Note: The electrical branding irons offered are designed for use within the U.S. or countries with the same electrical standards. Due to varying electrical standards, international purchasers may need to provide a converter/adaptor (from their own sources) that will convert electrical current from their local electrical service to the U.S. standard 110 volt service with 3 wire plug.\|Hand Tools and Shop Accessories>Woodburning Tools>Branding Irons\|http://images.rockler.com/rockler/images/26304-01-80.jpg\|http://images.rockler.com/rockler/images/26304-02-200.jpg 6380\|http://www.rockler.com/product.cfm?page=6380&sid=AFF25\|Scroll crafted by Branding Irons\|We’ve rustled up some great new designs for our popular line of branding irons. Each lets you proudly proclaim your craftsmanship or makes a perfect gift for your favorite woodworker! Overall size of burn for items 26338 and 26327 will be 2-5/8' wide x 3/4' high.Available in your choice of torch or 110 volt electric. The Scroll Corner designs allows up to 20 characters per line. Please enter the information you want for each line on your 'Branding Iron' in the Customization Form on the next screen ( If you wish the first line to say 'Hand Crafted By' then you must enter this in the first line of the Customization Form).Personalized branding irons are non-returnable. CANADIAN ORDERS:An additional $9.50 is added for an Electrical Branding Iron special heating unit. Per Canadian electrical standards the head is pinned and cannot be removed. Wiring and plug complies with Canadian electrical standards.INTERNATIONAL ORDERS (other than Canadian):Note: The electrical branding irons offered are designed for use within the U.S. or countries with the same electrical standards. Due to varying electrical standards, international purchasers may need to provide a converter/adaptor (from their own sources) that will convert electrical current from their local electrical service to the U.S. standard 110 volt service with 3 wire plug.\|Hand Tools and Shop Accessories>Woodburning Tools>Branding Irons\|http://images.rockler.com/rockler/images/26338-01-80.jpg\|http://images.rockler.com/rockler/images/26338-01-200.jpg 6381\|http://www.rockler.com/product.cfm?page=6381&sid=AFF25\|Handsaw Branding Irons\|We’ve rustled up some great new designs for our popular line of branding irons. Each lets you proudly proclaim your craftsmanship or makes a perfect gift for your favorite woodworker! Overall size of burn for items 26356 and 26347 will be 2-7/8' wide x 1' high.Available in your choice of torch or 110 volt electric. The Handsaw design let you put in up to 15 characters per line. Please enter the information you want for each line on your 'Branding Iron' in the Customization Form on the next screen ( If you wish the first line to say 'Hand Crafted By' then you must enter this in the first line of the Customization Form).Personalized branding irons are non-returnable. CANADIAN ORDERS:An additional $9.50 is added for an Electrical Branding Iron special heating unit. Per Canadian electrical standards the head is pinned and cannot be removed. Wiring and plug complies with Canadian electrical standards.INTERNATIONAL ORDERS (other than Canadian):Note: The electrical branding irons offered are designed for use within the U.S. or countries with the same electrical standards. Due to varying electrical standards, international purchasers may need to provide a converter/adaptor (from their own sources) that will convert electrical current from their local electrical service to the U.S. standard 110 volt service with 3 wire plug.\|Hand Tools and Shop Accessories>Woodburning Tools>Branding Irons\|http://images.rockler.com/rockler/images/26356-01-80.jpg\|http://images.rockler.com/rockler/images/26356-01-200.jpg 6382\|http://www.rockler.com/product.cfm?page=6382&sid=AFF25\|Oval Branding Irons\|We’ve rustled up some great new designs for our popular line of branding irons. Each lets you proudly proclaim your craftsmanship or makes a perfect gift for your favorite woodworker! Overall size of burn for items 26364 and 26372 will be 2-3/4' wide x 1' high.Available in your choice of torch or 110 volt electric. You may put up to 18 characters per line in the Oval designs. Please enter the information you want for each line on your 'Branding Iron' in the Customization Form on the next screen ( If you wish the first line to say 'Hand Crafted By' then you must enter this in the first line of the Customization Form).Personalized branding irons are non-returnable. CANADIAN ORDERS:An additional $9.50 is added for an Electrical Branding Iron special heating unit. Per Canadian electrical standards the head is pinned and cannot be removed. Wiring and plug complies with Canadian electrical standards.INTERNATIONAL ORDERS (other than Canadian):Note: The electrical branding irons offered are designed for use within the U.S. or countries with the same electrical standards. Due to varying electrical standards, international purchasers may need to provide a converter/adaptor (from their own sources) that will convert electrical current from their local electrical service to the U.S. standard 110 volt service with 3 wire plug.\|Hand Tools and Shop Accessories>Woodburning Tools>Branding Irons\|http://images.rockler.com/rockler/images/26364-01-80.jpg\|http://images.rockler.com/rockler/images/26364-01-200.jpg 6384\|http://www.rockler.com/product.cfm?page=6384&sid=AFF25\|Black and Chrome Casters\|Put a fresh spin on your projects. Black casters with stylish chrome accents feature a wheel brake. 110 lb. load-rating! 4-1/2' High overall. 2-1/2' x 1-3/4' mounting plate. 3' diameter wheel. Priced individually\|Hardware>Casters\|http://images.rockler.com/rockler/images/37574-01-80.jpg\|http://images.rockler.com/rockler/images/37574-01-200.jpg 6385\|http://www.rockler.com/product.cfm?page=6385&sid=AFF25\|Slimline Black And Silver Casters\|4-1/2' High overall. Mounting plate measures 17/8' square. 55 lb. load rating.Priced individually\|Hardware>Casters\|http://images.rockler.com/rockler/images/37565-01-80.jpg\|http://images.rockler.com/rockler/images/37565-01-200.jpg 6387\|http://www.rockler.com/product.cfm?page=6387&sid=AFF25\|AntiSlip Pads\|\|Hardware>Glides, Bumpers and Cushions\|http://images.rockler.com/rockler/images/37694-01-80.jpg\|http://images.rockler.com/rockler/images/37694-01-200.jpg 6395\|http://www.rockler.com/product.cfm?page=6395&sid=AFF25\|SelfClosing Accuride 3834 OverTravel Slide\|Get the smooth action and stability you expect from Accuride plus self-closing and 'over-travel' capabilities! A spring-loaded device creates the self-closing, stay-closed functions, Closing action starts when the drawer is within 1-1/4' to 2' of the closed position. Tension keeps the drawer from bouncing back out, and ensures that the drawer fronts are square and aligned! Load-rated to 90 lbs.NOTE: We MAY NOT carry all sizes listed on the Accuride Product Information Sheet.\|Shop by Project>Kitchen>Drawer Hardware>Ball Bearing Drawer Slides\|http://images.rockler.com/rockler/images/37406-01-80.jpg\|http://images.rockler.com/rockler/images/37406-01-200.jpg 6396\|http://www.rockler.com/product.cfm?page=6396&sid=AFF25\|Router Raizer\|With the Router Raizer no special insert is required (or included) - use any router plate from 3/16' to 1/2' thick will do the trick! Height adjustments are made with a speed wrench that fits through a small hole drilled through your insert plate. When hand-held, adjustments are made from the top with a knurled adjustment knob that also works with the speed wrench. Router Raizer includes all the necessary components, instructions, and templates you need to turn your plunge router into an easily adjustable Router Raizer. Slight modification to your router is required, but well worth the effort. Router Raizer (26031)* is designed to fit the following plunge routers: Porter Cable 7538, 7529, 7539, Porter Cable 693/693PK and 6931 base; DeWalt DW625; Hitachi M12V and TR12; Makita 3612B, 3612BR, and 3612C; Ryobi RE600; Craftsman 27505, 27506, 27510, and 27511; Freud FT2000 and FT2000E, Elu 3337. Use Router Raizer RZ200 (61073)* for the Fein RT1800 Bosch 1619, 1617/1618 Plunge Base Makita RP/RF 1101 Plunge Base *Slight router modification is required for both styles.\|Power Tools>Routers and Accessories>Router Lifts\|http://images.rockler.com/rockler/images/26031-01-80.jpg\|http://images.rockler.com/rockler/images/26031-01-200.jpg 6397\|http://www.rockler.com/product.cfm?page=6397&sid=AFF25\|Porter Cable Portable Table Saw and Accessories\|This 15 amp, 10' Portable Table Saw works where you do; with a base designed for bench, stand, or job site 2 x 4 sawhorse mounting. Along with a powerful motor, this saw features an electric brake; under-table storage; includes a Riptide 24T carbide-tipped blade, premium miter gauge, rip fence, quick-release blade guard, and blade wrenches. It can also accommodate 13/16' dado sets. On top of a generous 26' x 20' table surface, the extra-wide 24-1/2' rip capacity allows for easy ripping of 4' x 8' plywood sheets. Add the optional Quick Folding Stand, Outfeed Material Support, and Dado Throat Plate Insert for maximum performance anywhere, anytime!\|Power Tools>Power Tools and Accessories>Table Saws>Portable Saws\|http://images.rockler.com/rockler/images/26066-01-80.jpg\|http://images.rockler.com/rockler/images/26066-01-200.jpg 6398\|http://www.rockler.com/product.cfm?page=6398&sid=AFF25\|Bahco Ergo Pocket Scraper And Accessories\|Comes complete with a triangle profile blade and belt holster. Additional blades (sold separately) include rounded, pear-shaped, and dropped-shapes. All blades are made of cemented carbide for superior sharpness and durability. Drop-Shaped Blade Pear-Shaped Blade Round Blade\|Hand Tools and Shop Accessories>Hand Tools>Planes, Scrapers and Rasps\|http://images.rockler.com/rockler/images/26101s.jpg\|http://images.rockler.com/rockler/images/26101.jpg 6399\|http://www.rockler.com/product.cfm?page=6399&sid=AFF25\|Cable Clamp\|The Package includes 1 medium and 4 small Cable Clamps. All are designed to accommodate a wide array of applications, including organizing standard desktop computer cables all the way to bundling extension cords as long as 100'. Colors vary.\|Hand Tools and Shop Accessories>Workshop Accessories>Shop Accessories\|http://images.rockler.com/rockler/images/12597-01-80.jpg\|http://images.rockler.com/rockler/images/12597-01-200.jpg 6400\|http://www.rockler.com/product.cfm?page=6400&sid=AFF25\|US Quarter Collection Board\|OPTIONAL ACCESSORIES : 28374 - Collection Board Lumber Kit Option 1: Customize your plan with our Mixed Species Lumber Kit as shown. Order item 28374 above. Click here for more Collection Board Lumber Kit information and ordering links to lumber pages. Collection Board Lumber Kit Option 2: Use the standard plan bill of materials as shown in the Wood Magazine Plan. Click here for Standard Plan Bill of Materials 26487 - U.S. Quarter Board Brass Plaque For the final flourish, add the brass plaque! 26057 - Quarter-Size Forstner bit The carbide-tipped bit has a 3/8' diameter x 4' long shank and makes a perfect quarter-size (0.995' diameter) hole. Simply secure quarters with sticky tack. To create without a drill press, opt for our 'Quarter Bit Kit,' which includes the bit, plus our exclusive JIG IT drill guide and stop collar. 32702 - State Quarter 50-Coin Set Great set for those people making the map as a gift or just for collecting. Includes 2 each of 25 coins, one from each mint, years 1999, 2000, 2001, 2002, 2003. The 2003 State Quarter Set includes 10 quarters, 2 each of Illinois, Alabama, Arkansas, Missouri and Maine. 29317 - Quarter Size Plug Cutter Use our plug cutter # 29317 to fill the holes with your choice of wood until you find the right quarter!\|Plans, Books, CD's, DVD's and Videos>Woodworking Plans>Small Project Plans\|http://images.rockler.com/rockler/images/26496-01-80.jpg\|http://images.rockler.com/rockler/images/26496-01-200.jpg 6401\|http://www.rockler.com/product.cfm?page=6401&sid=AFF25\|US QuarterSize Forstner Bit\|The recent issue by the U.S. Mint of quarters honoring all fifty states has rekindled an interest in coin collecting.The carbide-tipped bit has a 3/8' diameter x 4' long shank and makes a perfect quarter-size (0.995' diameter) hole. Simply secure quarters with sticky tack. To create without a drill press, opt for our 'Quarter Bit Kit,' which includes the bit, plus our exclusive JIG IT drill guide and stop collar.Click here to see the complete State Quarter Collection Board plan.\|Hand Tools and Shop Accessories>Drilling>Drill Bits>Forstner Bits\|http://images.rockler.com/rockler/images/26057-02-80.jpg\|http://images.rockler.com/rockler/images/26057-02-200.jpg 6406\|http://www.rockler.com/product.cfm?page=6406&sid=AFF25\|314 x 2 WalletSized Diamond Sharpening Stone\|Ultra-hard diamond gives you a fine edge fast. Works dry or with water, no messy oils needed. Works on steel, carbide, glass, ceramic, and even titanium!\|Hand Tools and Shop Accessories>Sharpening>Diamond Sharpening Systems\|http://images.rockler.com/rockler/images/26399-01-80.jpg\|http://images.rockler.com/rockler/images/26399-01-200.jpg 6407\|http://www.rockler.com/product.cfm?page=6407&sid=AFF25\|Sanding Pads\|Changing sandpaper is easy: Unlike traditional block sanders, these pads accept standard 5" hook and loop sandpaper disks (sold separately on page 20). Both the flat style and the round style (flexible for contour sanding) feature an ergonomic design that helps eliminate hand fatigue. Sanding pads sold as a set.\|Finishing, Sanding, and Glues>Sanding>Sanding Accessories\|http://images.rockler.com/rockler/images/26381-01-80.jpg\|http://images.rockler.com/rockler/images/26381-01-200.jpg 6413\|http://www.rockler.com/product.cfm?page=6413&sid=AFF25\|Clamp Clip\|Can be drilled and screwed to your work surface or used to mount 3/4" pipe to your workbench or sawhorse. Wood not included.\|Hand Tools and Shop Accessories>Clamps>Pipe Clamps\|http://images.rockler.com/rockler/images/26390-01-80.jpg\|http://images.rockler.com/rockler/images/26390-01-200.jpg 6414\|http://www.rockler.com/product.cfm?page=6414&sid=AFF25\|3M HiStrength 90 Spray Adhesive\|\|Finishing, Sanding, and Glues>Gluing, Epoxy, Adhesives and Fillers>Veneering Adhesives\|http://images.rockler.com/rockler/images/50534-01-80.jpg\|http://images.rockler.com/rockler/images/50534-01-200.jpg 6415\|http://www.rockler.com/product.cfm?page=6415&sid=AFF25\|JointR Clamp Kit\|Straighten any length of lumber using your table saw.It's never been easier or more economical to make straight and even edges on any size stock. No need buy a jointer, with the Joint'R Clamp Kit, all you need is your Table Saw. Simply attach to a straight board that has been rabbeted out at the bottom, clamp it to your stock and go! Straighten crooked boards, true-up rough-sawn edges, and make shallow taper cuts with positive control all in one pass with your Table Saw and Joint'R Clamp.\|Power Tools>Power Tools and Accessories>Table Saw Miter Gauges, Tenoning Jigs and Fences\|http://images.rockler.com/rockler/images/25725-01-80.jpg\|http://images.rockler.com/rockler/images/25725-01-200.jpg 6416\|http://www.rockler.com/product.cfm?page=6416&sid=AFF25\|Cable Clamp\|Get a grip on all your cables. Just gather together your cable or wires and place them between the Cable Clamp 'jaws,' close the clamp, then squeeze the jaws together. To reopen, just push the trigger and pull open the jaws! It’s perfect for stereos, computers, TVs, shop tools and more. The Package includes 1 medium and 4 small Cable Clamps. All are designed to accommodate a wide array of applications, including organizing standard desktop computer cables all the way to bundling extension cords as long as 100'. Colors vary.\|Shop by Project>Entertainment Center>Cord and Wire Management\|http://images.rockler.com/rockler/images/12597s.jpg\|http://images.rockler.com/rockler/images/12597.jpg 6421\|http://www.rockler.com/product.cfm?page=6421&sid=AFF25\|Acme Ball Casters\|All components are made of carbon steel with a solid black finish.Stem style includes sockets. Sold in sets of 4.\|Hardware>Casters\|http://images.rockler.com/rockler/images/24687-01-80.jpg\|http://images.rockler.com/rockler/images/24687-01-200.jpg 6427\|http://www.rockler.com/product.cfm?page=6427&sid=AFF25\|Robert Sorby Bowl Gouges\|Throughout the world, the name Robert Sorby is synonymous with all that is good in woodturning and Robert Sorby turning tools remain the benchmark by which all others are judged. Robert Sorby bowl gouges are a must in the tool kit of every bowl turner. Milled from round bar, giving both mass and stability. These tools are ideal for making bowls. They can produce either massive profiling cuts or delegate as necessary. Standard Bowl Gouges Size Code Overall Length Handle Length ¼' - 6mm 842LH 23" 14" 3/8' - 10mm 842LH 23" 14" 1/2' - 19mm 842XLH 23" 14" Fingernail Bowl Gouges Size Code Overall Length Handle Length 3/8' - 10mm 842FLH 23' 14' 1/2' - 13mm 842FLH 23' 14'\|Hand Tools and Shop Accessories>Turning Tools and Accessories>Turning Hand Tools\|http://images.rockler.com/rockler/images/47589-01-80.jpg\|http://images.rockler.com/rockler/images/47589-01-200.jpg 6428\|http://www.rockler.com/product.cfm?page=6428&sid=AFF25\|Robert Sorby Registered Chisel Double Hooped Ash Handled\|The workhorse of the range. A strong well balanced tool for general applications. Steel hooped handle to withstand repeated mallet blows. Fitted with double hoop Ash handle.Blade length - 4-5/8' - 7'Overall length - 10-1/2' - 13'\|Hand Tools and Shop Accessories>Hand Tools>Chisels\|http://images.rockler.com/rockler/images/47811s.jpg\|http://images.rockler.com/rockler/images/47811.jpg 6429\|http://www.rockler.com/product.cfm?page=6429&sid=AFF25\|Robert Sorby Spindle Gouges\|Standard Spindle Gouges Size Code Overall Length Handle Length 1/4' - 6mm 840H 16-1/2' 10' 3/8' - 10mm 840H 16-1/2" 10" 1/2' - 13mm 840H 18-1/4' 12' 3/4' - 19mm 840H 18-1/2" 12" Fingernail Spindle Gouges 3/8' - 10mm 840FH 16-1/2' 10' 1/2' - 13mm 840FH 18-1/4' 12'\|Hand Tools and Shop Accessories>Turning Tools and Accessories>Turning Hand Tools\|http://images.rockler.com/rockler/images/47613-01-80.jpg\|http://images.rockler.com/rockler/images/47613-01-200.jpg 6430\|http://www.rockler.com/product.cfm?page=6430&sid=AFF25\|Robert Sorby Round Nose Scraper\|Used on bowls and spindle work to create smooth flowing curves e.g. goblets, egg cups, and inside boxes. Size Code Overall Length Handle Length 3/4" - 19mm 820H 16' 10' 1/2' - 13mm 820H 16' 10' 1" - 25mm 820H 18-1/2' 12
5Piece Crown ProPM Turning Set Set includes the following tools:3/4" Roughing Out Gouge, 12-1/2" handle, 6-3/8" shank (Crown #230PM)3/8" Spindle Gouge, 12-1/2" handle, 7" shank (Crown #236PM)3/8" Short Bowl Gouge, 12-1/2" handle, 6-7/8" shank (Crown #241SPM)3/16" Diamond Parting Tool, 12-1/2" handle, 6-7/8" shank (Crown #246PM)3/4" Skew Chisel, 12-1/2" handle, 6-3/4" shank (Crown #270APM)Features:Solid ash black handlesHeavy brass ferrulesPowdered metal technologyAll the essential tools in one set!
Thin Kerf Parting Tool 116 10-1/2" long.Blade extends 4-1/2" from handle.6" riveted Ash handle.
Fluted Parting Tool 2mm 12" Ash handle.Long bevel has a milled flute which is the cutting face.Small bevel is the sharpening face.
Hunter 3 and 4 Round Turning Tools #3 Turning Tool3/8” diameter cutter4-3/4" long, 3/8" diameter shank19-3/4" overall tool length.#4 Turning Tool1/2” diameter cutter6-1/2" long, 1/2" diameter shank24" overall tool length.Tips:Hold the #4 round tool slightly above center at about a 45 angle. Once you find the “sweet spot” it cuts very free. Do not try to “ride the bevel,” but position the tool to utilize the cutting action of the chip groove. Features:Once the tool edge dulls, simply rotate the carbide disc cutter for a fresh edge. Replace the cutter when it wears out.Does not require grinding or lapping.With strong metal shank to minimize vibration and chatter.Holder has an aluminum oxide finish to prevent rust.Sturdy ash handles.Includes cutter, wrench and screw.Replacement cutters sold separately.
Ellsworth Signature Gouge Allows you to make huge roughing cuts and delicate finish cuts on both the inside and outside of open bowls and hollow forms.High speed steel.Brass ferrule.17" handle, 10-1/4" blade.Honing required.David Ellsworth’s work has appeared in museums throughout the U.S. He was president of the American Association of Woodturners from 1986-91, and received the Lifetime Achievement Award from Collectors of Wood Art in 2002.
Stubai 1 sweep Straight Chisel Carving Tool Solid shaft tool holds up during malleting. Completely tempered! High carbon steel; double annealed. 59-61 Rockwell. Rough out very quickly. Work smallest details. Lightly hone to polish. Hand forged and sharpened. Fully guaranteed. Hold a superior edge. Shiny blade finish. Internal ferrule/square tang. Octagonal beechwood handle. Choose from straight chisels, skew chisels, shallow gouges, medium gouges, deep gouges, 60 v-tools and deep veiners. #1 (sweep) Straight Chisels #2 (sweep) Skewed Chisels #3 (sweep) Shallow Gouges #5 (sweep) Medium Gouges #7 (sweep) Deep Gouges #9 (sweep) Deep Gouges #11 (sweep) Deep (U) Veiners #41 (sweep) V-Tools Stubai Professional Woodcarver's Sets 12-Piece Carver's Set 5-Piece Starter Set
ProVac Turning System Comes with 2-meter extraction hose with swivel connection and High Speed Steel roughing gouge (45º).Includes handle, locking screw, sharpening sleeve and reversible guide bush with screw.Specially designed jig can be used on most types of grinders - wet or dry - and fits on tool rest.55º bowl and 40º fingernail gouges sold separately.
10 Contour Gauge